COLLINITE LIQUID FIBERGLASS BOAT CLEANER

Posted on August 23, 2013 by emerald

Description
Mild-cut, compound removes film, light oxidation/discoloration/chalkiness, and tough stains from fiberglass boat finishes. Restores original color and gloss and facilitates the easy application of Collinite’s last step waxes; improving wax bond, spread/coverage and durability. Handcrafted and hand-poured in the USA.

Directions
Shake well before using. Surface should feel lukewarm to the touch. Apply THIN amount of No. 920 to section no larger than 3X3 ft at a time with applicator pad. Rub well to loosen all tarnish, oxidation etc. Reapply as necessary until surface is free of embedded contaminants. Before product dries, polish off with dry microfiber or soft cotton towel. For follow-up shine and protection on clean surfaces, use one of Collinite’s last step waxes (925, 885).
See TECH SHEET for additional tips and instructions.

Applications
-Soiled fiberglass, gel coat, single stage or lacquered paints as well as light colored clear coat; silver, white.
-Exterior marine, RV, and aeronautical finishes
-Tarnished chrome, stainless steel, aluminum, brass, and copper (uncoated)
-NOT recommended for coated / painted metals or clear coat paint.


Tech Sheet

Marine Product Selector Guide

Comments Off on COLLINITE LIQUID FIBERGLASS BOAT CLEANER

COLLINITE HEAVY DUTY LIQUID FLEETWAX

Posted on August 23, 2013 by emerald

Description
Returns original color and luster to oxidized, soiled, and stained fiberglass surfaces. Saves both time and money by combining restorative and protective properties in one easy step. Safely removes embedded contaminants, provides carnauba shine and lays down a durable coating of weather-protection. Handcrafted and poured in the USA. *Best Choice cleaner-wax Practical Sailor March 2007

Directions
Shake well before using. Surface should feel lukewarm to the touch. Apply THIN amount of No. 870 to section no larger than 2X2 ft at a time with applicator pad. Rub well to loosen all tarnish, oxidation etc. Reapply as necessary until surface is free of embedded contaminants. When product begins to dry, polish off with dry microfiber or soft cotton towel. For added protection/durability on clean surfaces, follow up with one of Collinite’s last step waxes (925, 885). See TECH SHEET for additional tips and instructions.

Applications
-Soiled fiberglass, gel coat, single stage or lacquered paints as well as light colored clear coat; silver, white.
-Exterior marine, automotive, RV, and aeronautical finishes
-Tarnished chrome, stainless steel, aluminum, brass, and copper (uncoated)
-NOT recommended for coated / painted metals or dark clear coat paint.


Tech Sheet

Marine Product Selector Guide

Comments Off on COLLINITE HEAVY DUTY LIQUID FLEETWAX

No. 925 Fiberglass Boat Wax

Posted on August 23, 2013 by emerald

Description
For those in search of glistening fiberglass and lasting protection without the elbow grease of a paste wax. Preserves finish and look by shielding against outdoor corrosion; UV, stains, chalking, salt spray, marine growth and more. Reduces surface drag (improving speed and fuel efficiency) while making washings faster and easier. Ideal for large surface area jobs where radiant shine, protective longevity and timely job completion are all paramount. Handcrafted and poured in the USA.

Directions
Apply THIN coat of wax with applicator pad to a CLEAN section no larger than 2X2 ft at a time. When wax begins to dry (light, hazy residue will appear on surface), remove with dry microfiber towel or cotton cloth. *If gel coat or fiberglass is soiled with stains/dirt/oxidation first use Collinite’s No. 920 Fiberglass Boat Cleaner.See TECH SHEET for additional application tips and instructions.

Applications
-Boat/personal watercraft, RV, aircraft; topsides, hull, rails etc.
-CLEAN, contaminant-free surfaces only
-Exterior gel coat, fiberglass, clear coat, and highly finished wood
-Painted plastic and both painted/unpainted metals; chrome, stainless steel, aluminum, copper, and brass
-NOT recommended for rubber, non-skid, black trim, vinyl, glass or non-painted plastic


Techsheet

Marine Product Selector Guide

Comments Off on No. 925 Fiberglass Boat Wax

Peek Paste Tube 100ml

Posted on August 23, 2013 by Adam Robertson

PEEK Polish sold in Canada by Emearld Coatings
PEEK® Cleans, Polishes & Protects

Aluminum, Acrylic, Arborite, Brass, Bronze, Beryllium, Chrome, Copper, Ceramic, Eisenglas, Fiberglass, Formica, Factory Gun Bluing, Gold, Glass, Linoleum, Magnesium, Marble, Nickel, Painted Surfaces, Pewter, Plastics, Perspex, Platinum, Silver, Sterling, Stainless Steel, and Tin.

PEEK® Safely Removes Acid Rain, Corrosion, Chalking, Dyes, Finger Marks, Flies, Grease, Graffiti, Heat Discoloration, Leaf Marks, Lime Deposit, Oxidation, Oil, Permanent marker, Powder Residue, Rust, Salt Water Stains, Tar, Tarnish, Tree Sap, Water Stains, and Wax Buildup. Non-Abrasive · Acid-Free · Anti-Oxidant · Safe on Skin             100% North American · Exceptional Quality

Tips:

  1. Apply Peek® sparingly. Do not let dry. Rub briskly on surface to be cleaned, using a dry or damp cloth.
  2. On large surface areas, Peek® may also be applied using a low-speed buffer (under 1000RPM).
  3. On intricate surfaces, Peek® may be applied using an old toothbrush surrounded by your polishing cloth.
  4. On minor rust or stubborn deposits, Peek® may be applied with a nylon scouring pad or #0000 brnze/stl wool.


PEEK POLISH SAFETY SHEET

peek-canada-1

peek-canada-2

Comments Off on Peek Paste Tube 100ml

PEEK MOUSSE

Posted on August 23, 2013 by Adam Robertson

PEEK Polish sold in Canada by Emearld Coatings
PEEK® Cleans, Polishes & Protects

Aluminum, Acrylic, Arborite, Brass, Bronze, Beryllium, Chrome, Copper, Ceramic, Eisenglas, Fiberglass, Formica, Factory Gun Bluing, Gold, Glass, Linoleum, Magnesium, Marble, Nickel, Painted Surfaces, Pewter, Plastics, Perspex, Platinum, Silver, Sterling, Stainless Steel, and Tin.

PEEK® Safely Removes Acid Rain, Corrosion, Chalking, Dyes, Finger Marks, Flies, Grease, Graffiti, Heat Discoloration, Leaf Marks, Lime Deposit, Oxidation, Oil, Permanent marker, Powder Residue, Rust, Salt Water Stains, Tar, Tarnish, Tree Sap, Water Stains, and Wax Buildup. Non-Abrasive · Acid-Free · Anti-Oxidant · Safe on Skin             100% North American · Exceptional Quality

Tips:

  1. Apply Peek® sparingly. Do not let dry. Rub briskly on surface to be cleaned, using a dry or damp cloth.
  2. On large surface areas, Peek® may also be applied using a low-speed buffer (under 1000RPM).
  3. On intricate surfaces, Peek® may be applied using an old toothbrush surrounded by your polishing cloth.
  4. On minor rust or stubborn deposits, Peek® may be applied with a nylon scouring pad or #0000 brnze/stl wool.

PEEK POLISH SAFETY SHEET

peek-canada-1

peek-canada-2

Comments Off on PEEK MOUSSE

RAL 8028 TERRA BROWN

Posted on August 22, 2013 by Adam Robertson
Ral8028 RAL 8028 TERRA BROWN
CHEMISTRY SD POLYESTER TGIC
REGULAR CURE SCHEDULE 375F/10 MIN
MIN RANGE 350F/15 MIN
MAX RANGE 400F/7 MIN
RECOMMENDED THICKNESS 2.0 TO 3.0 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.42 +/- .05
THEORETICAL COVERAGE 68 sq/ft @ 2.0 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY n/a
BALL IMPACT 120 in/lb
SDS Sheet info # #6B – Polyester TGIC (Group B)
SDS link https://emeraldcoatings.com/sds-sheets/
WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, CLEAR COAT IS NOT NEEDED BUT WILL ADD EXTRA PROTECTION.   When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings.
Comments Off on RAL 8028 TERRA BROWN

RAL 7037 DUSTY GREY (TGIC FREE VERSION)

Posted on August 22, 2013 by Adam Robertson

FORMULATION CHANGE **As of FEB 8th  2022, this colour has changed, to the Axalta HHA TGIC Free formulation.  Do not mix this powder with previous batches.

 

 

ral7037a RAL 7037 DUSTY GREY (NEW TGIC FREE VERSION, do not mix with old version)
CHEMISTRY HAA POLYESTER TGIC FREE
REGULAR CURE TEMP 375F/10 MIN
MIN TEMP 350F/15 MIN
MAX TEMP NA
RECOMMENDED THICKNESS 2.0 TO 3.0 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.63 ± 0.05
THEORETICAL COVERAGE 118 ft /lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 75-85+
SALT SPRAY 1,000 hours
BALL IMPACT 160 in/lbs
SDS Sheet info # #15 HAA POLYESTER TGIC FREE
SDS link https://emeraldcoatings.com/sds-sheets/
HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION.  WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection.   When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings.
Comments Off on RAL 7037 DUSTY GREY (TGIC FREE VERSION)

CANDY COPPER (TGIC FREE VERSION) 

Posted on August 22, 2013 by Adam Robertson
PC1036 CANDY COPPER (TGIC FREE VERSION)     do not mix with old version
CHEMISTRY POLYESTER TGIC A
REGULAR CURE TEMP 375F 15 MIN
MIN TEMP 338F 15-25 MIN
MAX TEMP 395F 5-15 MIN
RECOMMENDED THICKNESS 2.5-3.5 mils
PENCIL HARDNESS H
SPECIFIC GRAVITY 1.2-1.8 g/cm4
THEORETICAL COVERAGE 51.5 ft2 /lb at 2.5 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 20 in/lb
SDS Sheet info # #4 – Polyester TGIC Free
SDS link https://emeraldcoatings.com/sds-sheets/
This Product is transparent and will show the base coat through the finish.  It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat.  Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping.  Candy / transparent colours are considered tinted clear coats and have the durability and protection of a regular clear coat.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats.
Comments Off on CANDY COPPER (TGIC FREE VERSION) 

.180 X 5 inch LONG S HOOK (25 COUNT)

Posted on August 9, 2013 by Adam Robertson

.180 X 5″ LONG S HOOK ( 25 COUNT )

Weight capacity is approximately 80 LBS.

 

Comments Off on .180 X 5 inch LONG S HOOK (25 COUNT)

0.120 X 6 inch LONG S HOOK (25 COUNT)

Posted on August 9, 2013 by Adam Robertson

.120 X 6″ LONG S HOOK ( 25 COUNT )

Weight capacity is approximately 30 LBS.

 

Comments Off on 0.120 X 6 inch LONG S HOOK (25 COUNT)

.120 X 10 inch LONG S HOOK (25 COUNT)

Posted on August 9, 2013 by Adam Robertson

.120 X 10″ LONG S HOOK ( 25 COUNT )

Weight capacity is approximately 30 LBS.

Comments Off on .120 X 10 inch LONG S HOOK (25 COUNT)

.120 X 6 inch LONG S HOOK (50 COUNT)

Posted on August 8, 2013 by Adam Robertson

.120 X 6″ LONG S HOOK ( 50 COUNT )

Weight capacity is approximately 30 LBS.

Comments Off on .120 X 6 inch LONG S HOOK (50 COUNT)

POR-15® Top Coat Chassis Black

Posted on August 3, 2013 by emerald

POR-15® Top Coat may be applied directly to a clean prepped metal surface but, when used as a top coat over POR-15® Rust Preventive Coating it provides the toughest, most permanent protection against rust and corrosion ever developed. It won’t crack, chip or peel and will look terrific!  POR-15® Top Coat is not sensitive to ultra-violet light and may be exposed to sunlight without damaging consequences.

TECH SHEET   MSDS

MSDS TOP COAT CHASIS BLACK AEROSOL

 

Comments Off on POR-15® Top Coat Chassis Black

POR-15 Top Coat Silver

Posted on August 3, 2013 by emerald

POR-15® Top Coat may be applied directly to a clean prepped metal surface but, when used as a top coat over POR-15® Rust Preventive Coating it provides the toughest, most permanent protection against rust and corrosion ever developed. It won’t crack, chip or peel and will look terrific!

TECH SHEET     MSDS

Comments Off on POR-15 Top Coat Silver

Green Glow Pigment (71)

Posted on August 2, 2013 by Adam Robertson

Sold by the oz

Glow in the dark pigments are not transparent, they will give your base coat colour a washed out look when applying over top of darker colours. These pigments work best when applying over lighter colours like white. This can be mixed right into the base coat but will have a stronger look if applied in a inter-coat clear over top of a white base coat. These pigments are heavy and need to be mixed constantly. Be careful when using a gravity feed gun for liquid applications as the pigment will settle very fast and drop to the bottom. Always work on practice panels first to make sure you are achieving the look you want. These pigments will slightly change the hue of the base coat.

With liquid paint, 1 oz will mix 1 Pint
With Powder coating, 1 oz will mix 0.5 lbs of powder

Comments Off on Green Glow Pigment (71)

***NEW*** Blue Glow Pigment (72)

Posted on August 2, 2013 by Adam Robertson

Sold by the oz

Glow in the dark pigments are not transparent, they will give your base coat colour a washed out look when applying over top of darker colours. These pigments work best when applying over lighter colours like white. This can be mixed right into the base coat but will have a stronger look if applied in a inter-coat clear over top of a white base coat. These pigments are heavy and need to be mixed constantly. Be careful when using a gravity feed gun for liquid applications as the pigment will settle very fast and drop to the bottom. Always work on practice panels first to make sure you are achieving the look you want. These pigments will slightly change the hue of the base coat.

With liquid paint, 1 oz will mix 1 Pint
With Powder coating, 1 oz will mix 0.5 lbs of powder

Comments Off on ***NEW*** Blue Glow Pigment (72)