Hydrographic film
TRUE WEAVE GOLD
Length sold by the Meter
To order a 1/2 meter by 1 meter sample use the 0.5 option
FORMULATION CHANGE **As of Aug 31st 2021, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
AXALTA RAL 7012
| RAL7012A |
RAL 7012 BASALT GREY (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.59 ± 0.05 |
| THEORETICAL COVERAGE |
121 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
70-80+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
Hydromonkeys
Black only Japanese Samurai inspired film. Works well over a variety of base colours, although we recommend silver to make it really pop, then candy over the top if you want colour.
Film Width: 50cm
Length sold by the meter
Hydromonkeys
Our stickerbomb film is, in our opinion, the best looking stickerbomb currently on the market (yeah we might be a bit biased but other people have said that same thing!). High quality, crisp graphics and vibrant colours combine to make this one of our bestsellers. The apparently white background on this film is actually clear so while you CAN play around a little with base colours, we strongly recommend white for the best results.
Film Width: 50cm
Length sold by the meter
Hydromonkeys in Canada
CLOWNS
Remember those cute funny clowns from your childhood? Well these clowns are NOTHING like thEse! These are the clowns of nightmares, black on clear for any base colour.
Film Width: 100cm
Recommended Basecoat: Your imagination is the only limit.
Length sold by the meter
Hydromonkeys
A refresh of the wildly popular original Pistons And Turbos film. We have redesigned the original so the film is now a 100cm wide film (the original was only 50cm) and the graphics in the design are a little smaller so look sharper, and work better on smaller items, but are still large enough that they work well on larger projects.
Film Width: 100cm
Recommended Base: Whatever takes your fancy – this film works with almost any colour, as long as it isn’t too dark.
Length sold by the meter
Hydromonkeys
Hot Rods, rockabilly retro old-school design. Black only film, single colour so it will work over any basecoat or with any candy. Looks particularly clean when over a simple white base, then cleared. The graphics are strong, crisp and multi-directional so while you might want to try to get certain parts of the design on a part, pretty much any angle will work well.
Film Width: 100cm
Recommended Basecoat: Your imagination is the only limit (but we DO like it on plain white!).
Length sold by the meter
Hydromonkeys
Sharp, multi-directional with multiple sized graphics so it will work beautifully on small and large projects alike. This is a black-ink film so won’t stand out well on really dark backgrounds but other than that, the sky is the limit! Bright silver base and lots of candy will make this really catch the eye!
Film Width: 100cm
Recommended Base: Anything you can think of!
Length sold by the meter
Hydromonkeys
A 1m wide, full colour film covered in those pin-up girls you normally see on the side of WWII Bombers etc. We suggest you use a white base under this film as the parts which look white in the picture are actually transparent.
Film Width: 100cm
Recommended Base Colour: White
AIR CURE TUNGSTEN CERAKOTE
Cure Schedule:
Tack free at 40 minutes
Dry after 24-hours
100% cure after 5days
can withstand 1200f with out discoloring so is ideal for exhaust
*** SHAKE WELL BEFORE USE ***
***PLEASE STORE IN ROOM TEMP AND VENTILATE CONTAINER WEEKLY***
NEW BONDED DORMANT BLUE
*****WILL COME OUT SILVER WITHOUT A CLEAR COAT******
| PC1127 |
NEW BONDED DORMANT BLUE |
| CHEMISTRY |
POLYESTER TGIC A |
| REGULAR CURE TEMP |
340F/10 MIN |
| MIN TEMP |
NA |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2 – 3.0+ mil |
| PENCIL HARDNESS |
2H minimum |
| SPECIFIC GRAVITY |
1.27 +/- 0.05 |
| THEORETICAL COVERAGE |
151 sq.ft/lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
NA |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
100 in/lb |
| SDS Sheet info # |
#6A – Polyester TGIC (Group A) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| *Dormant Colours need a clear coat for the full colour to come through. *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings. |
WILL COME OUT SILVER WITHOUT A CLEAR COAT
AIR CURE CERAKOTE GLACIER BLACK 1800F
Cure Schedule (Ambient Temperature): Dry to touch at 4 hours Ready for use at 12 hours Full cure at 72 hours
Unsurpassed. No other word can adequetely describe Cerakote C-7600 Glacier Black coating. Formulated to withstand temperatures of over 2,000 degrees Fahrenheit and thermal shock from those temperatures directly into water with no adverse effects, C-7600 retains its deep black, sleek satin finish in the most extreme environments. C-Series coatings are a line of air cured, ready to spray ceramic coatings.Appearance * Ultra smooth* Deep, rich black finishApplication* Easy to apply, Single coat, Air cure formula * 85% solids yields higher coverage than any other high temp coating* Self-leveling propertiesOther* VOC Exempt in all 50 statesPerformance*Better thermal barrier properties than any other high temperature coating* Industry leading heated and un-heated corrosion resistance* No discoloration, even past 2000
*** SHAKE WELL BEFORE USE ***
***PLEASE STORE IN ROOM TEMP AND VENTILATE CONTAINER WEEKLY***
My Account