TRUE WEAVE BLACK

Posted on August 27, 2014 by emerald

TRUE WEAVE BLACK

Length sold by the Meter

Comments Off on TRUE WEAVE BLACK

GRAFFITI SKULL (50 cm wide) (5 meter roll SALE)

Posted on August 27, 2014 by emerald

50 cm wide film

Hydrographic film

GRAFFITI SKULL

Length per quantity is 5 meters long

We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products.  All sale films will be sold in 5-meter rolls at a time.  All sale films will be discontinued after they are sold out, once it’s gone it’s gone. 

 

Comments Off on GRAFFITI SKULL (50 cm wide) (5 meter roll SALE)

RAL 9002 GREY WHITE (TGIC FREE VERSION)

Posted on August 25, 2014 by emerald

FORMULATION CHANGE **As of Dec 8th 2021, this colour has changed, to the Axalta HHA TGIC Free formulation.  Do not mix this powder with previous batches.

 

 

ral9002a RAL 9002 GREY WHITE (NEW TGIC FREE VERSION, do not mix with old version)
CHEMISTRY HAA POLYESTER TGIC FREE
REGULAR CURE TEMP 375F/10 MIN
MIN TEMP 350F/15 MIN
MAX TEMP NA
RECOMMENDED THICKNESS 2.0 TO 3.0 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.69 ± 0.05
THEORETICAL COVERAGE 114 ft /lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-90+
SALT SPRAY 1,000 hours
BALL IMPACT 140 in/lbs
SDS Sheet info # #15 HAA POLYESTER TGIC FREE
SDS link https://emeraldcoatings.com/sds-sheets/
HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION.  WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection.   When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings.
Comments Off on RAL 9002 GREY WHITE (TGIC FREE VERSION)

RAL 3004 PURPLE RED

Posted on August 11, 2014 by emerald

 

 

 

 

 

 

 

 

ral3004 3004 PURPLE RED
CHEMISTRY SD POLYESTER TGIC
REGULAR CURE TEMP 375F/10 MIN
MIN TEMP 350F/15 MIN
MAX TEMP 400F/7 MIN
RECOMMENDED THICKNESS 2.5 TO 3.5 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.41 +/- .05
THEORETICAL COVERAGE 55 sq/ft @ 2.5 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY n/a
BALL IMPACT 120 in/lb
SDS Sheet info # #6B – Polyester TGIC (Group B)
SDS link https://emeraldcoatings.com/sds-sheets/

 

Comments Off on RAL 3004 PURPLE RED

SHOULDER LENGTH POLY GLOVES (50 PK)

Posted on August 7, 2014 by emerald

35″ SHOULDER LENGTH POLY GLOVES (50 PK)

Comments Off on SHOULDER LENGTH POLY GLOVES (50 PK)

RAL 5024 PASTEL BLUE

Posted on August 7, 2014 by emerald
ral5024 RAL 5024 PASTEL BLUE
CHEMISTRY SD POLYESTER TGIC
REGULAR CURE TEMP 375F/10 MIN
MIN TEMP 350F/15 MIN
MAX TEMP 400F/7 MIN
RECOMMENDED THICKNESS 2.0 TO 3.0 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.49 +/- .05
THEORETICAL COVERAGE 65 sq/ft @ 2.0 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 120 in/lb
SDS Sheet info # #6B – Polyester TGIC (Group B)
SDS link https://emeraldcoatings.com/sds-sheets/
WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection.   When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings.
Comments Off on RAL 5024 PASTEL BLUE

HOBBY KNIFE

Posted on August 7, 2014 by emerald

HOBBY KNIFE

Comments Off on HOBBY KNIFE

RAL 1012 LEMON YELLOW

Posted on July 30, 2014 by emerald

Color Description:
RAL 1012 – Lemon Yellow is a fresh, muted yellow with a hint of green, giving it a subtle citrus tone. It’s often used in automotive, industrial, and decorative applications where a soft, distinctive yellow finish is desired.

Pantone Match:
Closest match to Pantone 127 C (a light, slightly greenish yellow).

ral1012 RAL 1012 LEMON YELLOW
CHEMISTRY SD POLYESTER TGIC
REGULAR CURE TEMP 375F/10 MIN
MIN TEMP 350F/15 MIN
MAX TEMP 400F/7 MIN
RECOMMENDED THICKNESS 3 TO 4 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.50 +/- .05
THEORETICAL COVERAGE 43 sq/ft @ 3 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 100 in/lb
SDS Sheet info # #6B – Polyester TGIC (Group B)
SDS link https://emeraldcoatings.com/sds-sheets/

 

Comments Off on RAL 1012 LEMON YELLOW

TWILIGHT CANDY COPPER

Posted on July 30, 2014 by emerald

CANDY COPPER WITH A GOLD SPARKLE IN THE FINISH

MC1082 TWILIGHT CANDY COPPER
CHEMISTRY POLYESTER TGIC A
REGULAR CURE TEMP 375F 13-20 MIN
MIN TEMP 356F 15-25 MIN
MAX TEMP 400F 10-15 MIN
RECOMMENDED THICKNESS 2.5-3.5 mils
PENCIL HARDNESS H minimum
SPECIFIC GRAVITY 1.2-1.8 g/cm3
THEORETICAL COVERAGE 51.5 ft2 /lb at 2.5 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 20 in/lb
SDS Sheet info # #6A – Polyester TGIC (Group A)
SDS link https://emeraldcoatings.com/sds-sheets/
This Product is transparent and will show the base coat through the finish.  It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat.  Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping.  Candy / transparent colours are considered tinted clear coats and have the durability and protection of a regular clear coat.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats.
Comments Off on TWILIGHT CANDY COPPER

TWILIGHT CANDY RED

Posted on July 30, 2014 by emerald

CANDY RED WITH A  GOLD SPARKLE IN THE FINISH. 

MC1084 TWILIGHT CANDY RED
CHEMISTRY POLYESTER TGIC A
REGULAR CURE TEMP 375F 13-20 MIN
MIN TEMP 356F 15-25 MIN
MAX TEMP 400F 10-15 MIN
RECOMMENDED THICKNESS 2.5-3.5 mils
PENCIL HARDNESS H minimum
SPECIFIC GRAVITY 1.2-1.8 g/cm3
THEORETICAL COVERAGE 51.5 ft2 /lb at 2.5 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 20 in/lb
SDS Sheet info # #6A – Polyester TGIC (Group A)
SDS link https://emeraldcoatings.com/sds-sheets/
This Product is transparent and will show the base coat through the finish.  It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat.  Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping.  Candy / transparent colours are considered tinted clear coats and have the durability and protection of a regular clear coat.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats.
Comments Off on TWILIGHT CANDY RED

TWILIGHT CANDY PURPLE (1PB)

Posted on July 30, 2014 by emerald
MC1060 TWILIGHT CANDY PURPLE
CHEMISTRY POLYESTER TGIC-FREE
REGULAR CURE TEMP 375F 15 MIN
MIN TEMP 338F 15-25 MIN
MAX TEMP 395F 5-15 MIN
RECOMMENDED THICKNESS 2.5-3.5 mils
PENCIL HARDNESS H
SPECIFIC GRAVITY 1.2-1.8 g/cm6
THEORETICAL COVERAGE 51.5 ft2 /lb at 2.5 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 20 in/lb
SDS Sheet info # #4 – Polyester TGIC Free
SDS link https://emeraldcoatings.com/sds-sheets/
This Product is transparent and will show the base coat through the finish.  It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat.  Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping.  Candy / transparent colours are considered tinted clear coats and have the durability and protection of a regular clear coat.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats.
Comments Off on TWILIGHT CANDY PURPLE (1PB)

TREE BARK HYDROGRAPHICS

Posted on July 25, 2014 by emerald

Tree Bark hydrographics

Length sold by the Meter

Comments Off on TREE BARK HYDROGRAPHICS

LEOPARD SKIN 90cm

Posted on July 25, 2014 by emerald

Leopard Skin

Length sold by the Meter

Comments Off on LEOPARD SKIN 90cm

YELLOW BOA SNAKE SKIN 50cm

Posted on July 25, 2014 by emerald

Yellow Boa snake skin

50cm wide film

 

Comments Off on YELLOW BOA SNAKE SKIN 50cm

RED BOA SNAKE SKIN 50cm

Posted on July 25, 2014 by emerald

Red Boa snake skin

Length sold by the Meter

 

Comments Off on RED BOA SNAKE SKIN 50cm

FEVER RED

Posted on July 18, 2014 by emerald
MC1028 FEVER RED
CHEMISTRY Polyester TGIC Metallic
REGULAR CURE TEMP 375F/10 MIN
MIN TEMP 350F/15 MIN
MAX TEMP 400F/7 MIN
RECOMMENDED THICKNESS 2.5 TO 3.5 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.38 +/- .05
THEORETICAL COVERAGE 56 sq/ft @ 2.5 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 120 in/lb
SDS Sheet info # #9 – Polyester TGIC Metallic
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.
Comments Off on FEVER RED