P-22 Plastic-Glo is an ultra-fine cutting and high coloring compound for bringing out a smooth, brilliant finish on practically every type of plastic. No. P-22 is a pure white compound on the very dry side. Will not glaze on the buff or load up compound into crevices or recesses of the work. Being exceptionally fine, it will not scratch the softest plastic. Nothing better for producing the very finest finishes on transparent plastics.
F-168 is specifically formulated for applying to metal cutting saws. The tenacious, clinging grease film left on the cutting tool serves as a heat reducing coolant on the cutting teeth and work surface. The anti-heating properties in the formulation work by keeping the wax on the saw blade or tool, reducing the tendency to spin off the saw blade. The result is a smooth and quick cut, adding longer life to the cutting teeth.
F-168 prevents burning, clogging, chatter and tearing. It works well on all cutting operations of non-ferrous or ferrous metals. F-168 is soluble in water, non-toxic, non-irritating and biodegradable. Cleans easily by wiping or hot water flushing. F-168 ‘s fiber tube is made with an extended hollow end “Safety-Grip” hand applicator allowing the operator to hold and push the F-168 wax stick safely against the saw or cutting tool.
Uses: Band saws, Circular saws, Carpenter saws, Hack saws. Other uses: Drilling, Tapping, Grinding, Filing, Cutting, Metal Spinning, Polishing with Coated Abrasives. Packaged in a spiral wound Peel-a-Way paper tube 2″ x 12″ long tube with Safety Grip Handle!
Kit Includes:
This kit has been specially designed for polishing motorcycle and small engine parts using electric drills.
The Liquid WHITE ROUGE polish should be wiped onto the surface with a cloth, then buffed off using any wheel, bob or mushroom buff.
The sisal wheel is designed for aggressive cut down or scratch and buff mark removal using the black compound.
This kit contains everything you need to polish chrome, nickel and other hard metals. The arbor adapter allows you to mount the wheels on an electric drill. Use the white compound with the spiral sewn cotton wheel, followed by the blue compound.
The Blue Begone™ easily removes bluing from chrome, and can also be used as an excellent all around final polishing liquid. The Hourglass buff allows easy polishing of chrome pipes.
Kit Includes:
This kit has been specially designed for polishing stainless steel trim and other stainless parts using an electric drill or similar chuck tool.
The sisal wheel and black compound are used for scratch removal. The green compound is then used to polish the metal, followed by the white compound and finally the Blue Begone liquid polish if desired.
Loose buffs are designed to compact into tight spaces for easy polishing.
The mushroom buff and felt bob are used to get into small areas where the buffing wheels will not go.
Tired of using powders that need to be mixed with water?
Tired of silly little amounts of product for high prices?
Tired of all the hard work rubbing the pipes?
Then the BLUE BEGONE™ SYSTEM is for you!
We developed a special buffing wheel that fits straight into a drill chuck. The unique shape allows the buff to rest on the pipe without spinning off.
By simply rotating the drill, all angles of the pipe can be buffed rapidly. The tapered end allows you to get into difficult corners.
BLUE BEGONE™ is a special ready mixed water based buffing compound designed to polish chrome. It removes ‘bluing’ in seconds, whilst bringing chrome to a mirror shine. You can use BLUE BEGONE™ on ALL your chrome work.
BLUE BEGONE™ is also ideal for slower rotating buffing wheels such as 4″ wheels mounted on an arbor adapter.
Using the applicator nozzle, simply apply a small amount of compound to the buff, and lightly work it into and around the buff with your finger.
Place the buffer groove over the pipe and start buffing, using gentle pressure. Re-apply more BLUE BEGONE™ as needed.
Finally, using the wettened SHAMMY cloth, clean off any dried material.
The BLUE BEGONE™ Kit includes:
Kit Includes:
This kit will polish any metal or plastic part, and is designed to be used with a regular electric drill. It includes compounds and wheels to polish all types of metal and plastic. The included buffing booklet details the steps involved for each different type of metal.
The included arbor adapter allows the buffing wheels to be mounted in the chuck of the drill, and allows for quick wheel changes. The Cartridge Roll kit includes a mandrel, which is mounted in the drill chuck, and three tapered and three cylinder sanding rolls, course, medium and fine. These quickly remove casting marks and deep scratches.
The included felt bob kit can be used with the buffing compound to give access to tight spaces on parts.
If you plan on polishing with a drill, this is the only kit you’ll need.
Glu-Tite is a glue in a gelatin form. It melts under frictional heat when applied to a revolving buffing wheel. It serves as an anchoring size coat of glue and is used prior to applying greaseless compound. It permits forming a thicker and longer lasting abrasive head.
Greaseless Buffing compounds may be applied to almost any cloth buffing wheel, (sisal, spiral sewn cotton & loose cotton) turning it into a tough flexible grinding wheel. The roughest casting edges can be quickly removed. These materials do an excellent job of leveling highly contoured surfaces quickly.
Store at room temperature or below.
We recommend shipping these products by air during summer months to ensure the product does not melt during shipping.
‘Unbelievable’, that’s what restorers say when they see a demonstration of this incredible EPOXY PUTTY product. It’s so strong you can drill and tap it, yet gentle enough that you can apply it with your bare fingers. And since it’s WATER BASED, you can simply wet your fingers, and work with it until it is almost perfectly smooth before it dries – eliminating most sanding! But when it cures, it’s ROCK HARD, making it perfect for repairing steel, plastics, concrete, etc. Amazingly, it even sticks to damp surfaces, and will cure UNDERWATER, so it can be used to fix leaking basement walls, swimming pools, plumbing fixtures and so much more. Put some EPOXY PUTTY in your toolbox today. You’ll find yourself using it all over your shop and home.
Especially formulated for easy cleanup or thinning of POR-15®Rust Preventive Paint.
Quart
Experienced users know that moisture cannot be present when painting, and even though your spraying system may have moisture traps and filters, condensation may occur in the hose downstream and ruin your paint job.
Dry-Air Spray Gun Filter
This great filter will absorb up to one (1) fluid ounce of moisture and insure a perfectly dry system from start to finish every time. It absorbs oil aerosols, condensed moisture, and contaminants as small as 0.01 microns. It attaches directly to the air inlet of your spray gun and, as air passes between the filter’s compressed layers, particles and moisture are trapped.
This incredible filtration is accomplished at a true 30 CFM to the spray gun, with minimal pressure drop at the optimum flow rate.
POWER MESH (1 SQ, YD)
A special fiberglass reinforcing fabric that can be used with POR15 Rust Preventive paint to bridge gaps and repair holes in sheet metal.
Handling Instructions: Do not handle fabric with bare hands.
Because it is a special type of fiberglass cloth, the fibers may pierce your skin and you will experience discomfort. Wear a pair of gloves (or other protection) whenever you handle this cloth. As you cut the cloth, some fibers may fly into the air, so be sure to wear the mask provided while cutting. Please note that there is one large piece of cloth in this envelope.
.060″ X 4″ LONG V HOOK ( 50 Count)
Weight capacity is approximately 8 LBS.
068″ X 6″ LONG S HOOK ( 50 COUNT )
Weight capacity is approximately 12 LBS.
.080″ X 10″ LONG V HOOK ( 50 COUNT )
Weight capacity is approximately 15 LBS.
My Account