FORMULATION CHANGE **As of July 8th 2022, this colour has changed, to the Axalta HHA TGIC Free
| ral7015a |
RAL 7015 SLATE GREY (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
400F/10 MIN |
| MIN TEMP |
0 |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.46 ± 0.05 |
| THEORETICAL COVERAGE |
132 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
FORMULATION CHANGE **As of FEB 8th 2022, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
| ral7016a |
RAL 7016 ANTHRACITE GREY (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.52 ± 0.05 |
| THEORETICAL COVERAGE |
127 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
FORMULATION CHANGE **As of May 25th 2021, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
AXALTA RAL 7024
| RAL7024a |
RAL 7024 (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.57 ± 0.05 |
| THEORETICAL COVERAGE |
122 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
70-80+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
Our closest match to this product is AXALTA FF SUPER SILVER II If you are looking for more options.
| PC1186 |
SPARKLE SILVER |
| CHEMISTRY |
POLYESTER TGIC A |
| REGULAR CURE TEMP |
400F/10 MIN |
| MIN TEMP |
NA |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0-4.0 mils |
| PENCIL HARDNESS |
NA |
| SPECIFIC GRAVITY |
1.2 +/-0.05 g/cm³ |
| THEORETICAL COVERAGE |
152.14 sq.ft/lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
40-70 |
| SALT SPRAY |
NA |
| BALL IMPACT |
80 in/lb |
| SDS Sheet info # |
#6A – Polyester TGIC (Group A) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| *Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish. *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings. |
Aggressive buffs designed for buffing larger surface areas.
Use to cut metal with Greaseless or Black Emery Compound
With a thickness of 2″, this long lasting wheel is an economic alternative to stacking sisal wheels on a shaft.
The fibers are treated and stiff, giving an excellent hard surface for the initial cut to de-burr etc.
Use with Greaseless compounds or Black Emery.
6″ diameter x 2″ face x 1/2, or 5/8″ or 3/4″ hole
Thousands of thin cotton string strands will buff all types of plastics, including bacolite, to a shiny surface. The buff is specially designed to keep the plastic cool.
Bring side markers, turn signals, tail light lenses to shiny, like-new condition. Thousands of 1-3/4″ long cotton strands reach deep into details to gently polish and shine without overheating and melting plastic. Use in conjunction with our Plastic Glo Compound.
P-22 Plastic-Glo is an ultra-fine cutting and high coloring compound for bringing out a smooth, brilliant finish on practically every type of plastic. No. P-22 is a pure white compound on the very dry side. Will not glaze on the buff or load up compound into crevices or recesses of the work. Being exceptionally fine, it will not scratch the softest plastic. Nothing better for producing the very finest finishes on transparent plastics.
Save! Buy the plastic buffing kit
- 1 x 6″ string buff – choice of 1/2″ or 3/4″ hole size
- 1 x PLASTIC-GLO (Ultra Fine, dry grade)
Remove compound buildup on your buffing wheels, quickly and safely.
Our wheel rakes make cleaning your buffing wheels easy. Offer the jagged blade to the edge of the spinning wheel, and work it across the face until the wheel looks bright and fluffy once more. This action, done periodically, will remove entrapped metal particles, which could scratch a more delicate part.
Remove compound buildup on your buffing wheels, quickly and safely.
Our wheel rakes make cleaning your buffing wheels easy. Offer the jagged blade to the edge of the spinning wheel, and work it across the face until the wheel looks bright and fluffy once more. This action, done periodically, will remove entrapped metal particles, which could scratch a more delicate part.
My Account