BEAD BLAST GUN METAL POLYESTER POWDER
| pc1008 |
BEAD BLAST GUN METAL |
| CHEMISTRY |
POLYESTER TGIC C |
| REGULAR CURE SCHEDULE |
375F/15 min |
| MIN RANGE |
NA |
| MAX RANGE |
NA |
| RECOMMENDED THICKNESS |
1.80 – 3.50 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.70± 0.03 |
| THEORETICAL COVERAGE |
NA |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
NA |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
80 in/lb |
| SDS Sheet info # |
#6C – Polyester TGIC (Group C) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS. USE ZINC RICH PRIMER OVER STEEL PARTS FOR EXTERIOR APPLICATIONS |
FORMULATION CHANGE **As of July 8th 2022, this colour has changed, to the Axalta HHA TGIC Free
| ral7015a |
RAL 7015 SLATE GREY (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
400F/10 MIN |
| MIN TEMP |
0 |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.46 ± 0.05 |
| THEORETICAL COVERAGE |
132 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
FORMULATION CHANGE **As of FEB 8th 2022, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
| ral7016a |
RAL 7016 ANTHRACITE GREY (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.52 ± 0.05 |
| THEORETICAL COVERAGE |
127 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
FORMULATION CHANGE **As of May 25th 2021, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
AXALTA RAL 7024
| RAL7024a |
RAL 7024 (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.57 ± 0.05 |
| THEORETICAL COVERAGE |
122 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
70-80+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
My Account