FORMULATION CHANGE **As of June 10th 2022, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
AXALTA RAL 3000
| ral3000a |
3000 FLAME RED (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
400F/10 MIN |
| MIN TEMP |
0 |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.48 ± 0.05 |
| THEORETICAL COVERAGE |
130 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
70-80+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
FORMULATION CHANGE **As of June 8th 2022, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
AXALTA RAL 3003
| ral3003a |
RAL 3003 RUBY RED (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.45 ± 0.05 |
| THEORETICAL COVERAGE |
133 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85 |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
140 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
FORMULATION CHANGE **As of Aug 8th 2022, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
AXALTA RAL 3015
| ral3015a |
RAL 3015 (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.45 ± 0.05 |
| THEORETICAL COVERAGE |
133 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85 |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
140 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
FORMULATION CHANGE **As of June 16th 2023, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
| ral3018a |
ral3018a |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.62 ± 0.05 |
| THEORETICAL COVERAGE |
119 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
70-80+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
FORMULATION CHANGE **As of Aug 8th 2021, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
AXALTA RAL 3020 TRAFFIC RED
| ral3020a |
3020 TRAFFIC RED (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.52 ± 0.05 |
| THEORETICAL COVERAGE |
127 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS-CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
FORMULATION CHANGE **As of March 30th 2022, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
| ral4008a |
4008 SIGNAL VIOLET (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.51 ± 0.05 |
| THEORETICAL COVERAGE |
127 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-90+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
FORMULATION CHANGE **As of Dec 2nd 2021, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
| ral5005A |
5005 SIGNAL BLUE (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.55 ± 0.05 |
| THEORETICAL COVERAGE |
124 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
My Account