RAL 1001 – Beige is a warm, neutral tone often used in both interior and exterior applications. It offers a subtle, earthy hue that creates an elegant, understated finish. This color is widely used for a variety of applications, including automotive parts, architectural elements, and furniture. Its soft, versatile nature complements a wide range of environments, making it a popular choice for many industries.
Pantone Match:
Closest match to Pantone 7500 C (a soft, warm beige tone).
AXALTA RAL 1001
| ral1001a |
1001 BEIGE (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
400F/10 MIN |
| MIN TEMP |
NA |
| MAX TEMP |
400F/7 MIN |
| RECOMMENDED THICKNESS |
2.5 TO 3.5 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.52 ± 0.05 |
| THEORETICAL COVERAGE |
127 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
30 in/lb |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
HAA, TGIC-Free RAL Color
Note: Do not mix with previous TGIC versions. Ensure thorough gun cleaning between color changes to prevent cross-contamination.
This weather-resistant powder coating is suitable for both interior and exterior applications. A clear coat is optional but recommended for added protection.
For multi-stage coatings (2-3 layers), partially cure the base coat at 50-75% of the recommended time to allow the top coat to properly cross-link. This method results in the best possible bond between coats. Caution: Over-curing the base coat may lead to delamination between layers. |
|
FORMULATION CHANGE **As of Feb 27th 2023, this colour has changed, HHA TGIC Free formulation. Do not mix this powder with previous batches.
RAL 1003 powder coaiting – Signal Yellow
Color Description:
RAL 1003 – Signal Yellow is a vibrant, attention-grabbing color. This bright yellow tone is often used for high-visibility applications, such as safety equipment, traffic signs, and machinery. It offers exceptional visibility and is widely favored in industrial and automotive environments where clarity and safety are key.
Pantone Match:
Closest match to Pantone 116 C (a bright, intense yellow with a similar high-visibility tone).
| ral1003a |
ral1003a (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
400F/7 MIN |
| RECOMMENDED THICKNESS |
3.5-4.5 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.58 ± 0.05 |
| THEORETICAL COVERAGE |
122 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
85+/- 3 |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lb |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
RAL 1006 – Maize Yellow
Color Description:
RAL 1006 – Maize Yellow is a bold, warm yellow color with an earthy tone, similar to ripe maize. This color is popular for applications in industrial and automotive settings, providing high visibility and a vibrant finish suited to construction, machinery, and safety products.
Pantone Match:
Closest match to Pantone 123 C (a strong, vibrant yellow with a slight orange undertone).
| ral1006 |
1006 MAIZE YELLOW |
| CHEMISTRY |
SD POLYESTER TGIC |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
400F/7 MIN |
| RECOMMENDED THICKNESS |
2.5 TO 3.5 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.42 +/- .05 |
| THEORETICAL COVERAGE |
54 sq/ft @ 2.5 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-95+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
120 in/lb |
| SDS Sheet info # |
#6B – Polyester TGIC (Group B) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
RAL 1007 – Daffodil Yellow
Color Description:
RAL 1007 – Daffodil Yellow is a vibrant, warm yellow with an orange undertone. Reminiscent of daffodil flowers. This color is highly visible. Is often used in automotive, industrial, and decorative applications where a bold, eye-catching finish is needed.
Pantone Match:
Closest match to Pantone 137 C (a bright yellow with an orange tint).
A very close match to cub cadet yellow
| RAL1007 |
1007 DAFFODIL YELLOW |
| CHEMISTRY |
SD POLYESTER TGIC |
| REGULAR CURE SCHEDULE |
375F/10 MIN |
| MIN RANGE |
350F/15 MIN |
| MAX RANGE |
400F/7 MIN |
| RECOMMENDED THICKNESS |
2.5 TO 4.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.47 +/- .05 |
| THEORETICAL COVERAGE |
53 sq/ft @ 2.5 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-95+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
120 in/lb |
| SDS Sheet info # |
#6B – Polyester TGIC (Group B) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, CLEAR COAT IS NOT NEEDED BUT WILL ADD EXTRA PROTECTION. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
RAL 1013 – Oyster White
Color Description:
RAL 1013 – Oyster White is an elegant, off-white shade with a hint of beige. Providing a soft, warm finish. It’s widely used in automotive, architectural, and decorative applications.
Pantone Match:
Closest match to Pantone 7527 C (a light, warm beige similar to Oyster White).
FORMULATION CHANGE **As of July 8th 2022, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
| ral1013a |
1013 OYSTER WHITE (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.67 ± 0.05 |
| THEORETICAL COVERAGE |
115 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
161 in/lb |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
HAA, TGIC-Free RAL Color
Note: Do not mix with previous TGIC versions. Ensure thorough gun cleaning between color changes to prevent cross-contamination.
This weather-resistant powder coating is suitable for both interior and exterior applications. A clear coat is optional but recommended for added protection.
For multi-stage coatings (2-3 layers), partially cure the base coat at 50-75% of the recommended time to allow the top coat to properly cross-link. This method results in the best possible bond between coats. Caution: Over-curing the base coat may lead to delamination between layers.
Color Description:
RAL 1015 – Light Ivory is a soft, neutral ivory color with a slightly warm tone. It provides a subtle, refined look, making it ideal for modern, minimalistic designs. Commonly used in automotive, architectural, and industrial applications, it adds sophistication to any surface.
Pantone Match:
Closest match to Pantone 7499 C, a light, warm ivory with a soft, refined tone.
| RAL1014 |
1014 DARK IVORY |
| CHEMISTRY |
SD POLYESTER TGIC |
| REGULAR CURE SCHEDULE |
375F/10 MIN |
| MIN RANGE |
350F/15 MIN |
| MAX RANGE |
400F/7 MIN |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.52 +/- .05 |
| THEORETICAL COVERAGE |
64 sq/ft @ 2 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-95+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
120 in/lb |
| SDS Sheet info # |
#6B – Polyester TGIC (Group B) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, CLEAR COAT IS NOT NEEDED BUT WILL ADD EXTRA PROTECTION. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
Color Description:
RAL 1015 – Light Ivory is a soft, neutral ivory color with a slightly warm tone. It provides a subtle, refined look, making it ideal for modern, minimalistic designs. Commonly used in automotive, architectural, and industrial applications, it adds sophistication to any surface.
Pantone Match:
Closest match to Pantone 7499 C, a light, warm ivory with a soft, refined tone.
AXALTA RAL 1015
| ral1015a |
1015 LIGHT IVORY (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.7 ± 0.05 |
| THEORETICAL COVERAGE |
113 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lb |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
HAA, TGIC-Free RAL Color
Note: Do not mix with previous TGIC versions. Ensure thorough gun cleaning between color changes to prevent cross-contamination.
This weather-resistant powder coating is suitable for both interior and exterior applications. A clear coat is optional but recommended for added protection.
For multi-stage coatings (2-3 layers), partially cure the base coat at 50-75% of the recommended time to allow the top coat to properly cross-link. This method results in the best possible bond between coats. Caution: Over-curing the base coat may lead to delamination between layers.
Color Description:
Axalta RAL 1016 – Sulfur Yellow is a bright, vibrant yellow with a slightly greenish tint. This color is commonly used for high-visibility and safety applications due to its eye-catching brightness. Ideal for automotive, industrial, and construction uses, RAL 1016 ensures visibility and durability in tough environments.
Pantone Match:
Closest match to Pantone 375 C, a lively, green-tinged yellow similar to RAL 1016.
| RAL1016a |
1016 SULFER YELLOW (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.5 TO 3.5 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.61 ± 0.05 |
| THEORETICAL COVERAGE |
119 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
70-80+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lb |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
HAA, TGIC-Free RAL Color
Note: Do not mix with previous TGIC versions. Ensure thorough gun cleaning between color changes to prevent cross-contamination.
This weather-resistant powder coating is suitable for both interior and exterior applications. A clear coat is optional but recommended for added protection.
For multi-stage coatings (2-3 layers), partially cure the base coat at 50-75% of the recommended time to allow the top coat to properly cross-link. This method results in the best possible bond between coats. Caution: Over-curing the base coat may lead to delamination between layers. |
Color Description:
RAL 1023 – Traffic Yellow is a bright, vivid yellow that is commonly used for high-visibility applications. This color is ideal for automotive parts, signage, and any surface where visibility and attention are key. It provides excellent contrast and stands out in both daylight and low-light conditions, making it perfect for safety and traffic-related uses.
Pantone Match:
Closest match to Pantone 123 C, a bright yellow with a strong, attention-grabbing appearance.
| ral1023 |
1023 TRAFFIC YELLOW |
| CHEMISTRY |
SD POLYESTER TGIC |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
400F/7 MIN |
| RECOMMENDED THICKNESS |
3 TO 4 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.35 +/- .05 |
| THEORETICAL COVERAGE |
48 sq/ft @ 3.0 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-95+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
120 in/lb |
| SDS Sheet info # |
#6B – Polyester TGIC (Group B) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
Color Description:
RAL 1024 – Ochre Yellow is a deep, earthy yellow with a warm, rustic feel. It has a subtle orange undertone, making it an ideal choice for creating a vintage or industrial look. This color is commonly used in machinery, automotive parts, and construction equipment. It provides a durable and weather-resistant finish, perfect for outdoor applications.
Pantone Match:
Closest match to Pantone 7570 C, a rich ochre with orange undertones, similar to RAL 1024.
| ral1024 |
1024 OCHRE YELLOW |
| CHEMISTRY |
SD POLYESTER TGIC |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
400F/7 MIN |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.46 +/- .05 |
| THEORETICAL COVERAGE |
66 sq/ft @ 2.0 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-95+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
120 in/lb |
| SDS Sheet info # |
#6B – Polyester TGIC (Group B) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
Description
RAL 1033 Powder Coat. Dahlia Yellow is a vibrant yellow with a slight orange tint. It’s bold and attention-grabbing, ideal for automotive, industrial, and signage applications. The color is durable and provides a bright, energetic finish.
Pantone Match:
Closest match to Pantone 137 C, a bright yellow with an orange hue.
| ral 1033 powder coat |
1033 DAHLIA YELLOW |
| CHEMISTRY |
SD POLYESTER TGIC |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
400F/7 MIN |
| RECOMMENDED THICKNESS |
2.5 TO 3.5 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.41 +/- .05 |
| THEORETICAL COVERAGE |
55 sq/ft @ 2.5 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-95+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
120 in/lb |
| SDS Sheet info # |
#6B – Polyester TGIC (Group B) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
Description
RAL 2000 powder coat Yellow Orange is a bit of a dull odd orange. Some might like its rustic charm. It’s more subdued, giving off a warmer, earthy vibe—perfect for projects looking for something a little different.
Pantone Match:
Closest match to Pantone 1505 C, a bright yellow-orange color that provides similar vibrancy to RAL 2000 powder coat.
| ral 2000 powder coat |
2000 YELLOW ORANGE |
| CHEMISTRY |
SD POLYESTER TGIC |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
400F/7 MIN |
| RECOMMENDED THICKNESS |
2.5 TO 3.5 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.40 +/- .05 |
| THEORETICAL COVERAGE |
55 sq/ft @ 2.5 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-95+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
120 in/lb |
| SDS Sheet info # |
#6B – Polyester TGIC (Group B) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
RAL 2001 Red Orange is a bold, earthy orange with a hint of red, kind of rustic orange with full gloss.
Pantone Match:
Closest match to Pantone 172 C, a red-orange with a similar warmth and presence to RAL 2001.
FORMULATION CHANGE **As of Jan 8th 2023, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
| ral2001a |
ral2001a (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
350F/15 MIN |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.5 TO 3.5 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.58 ± 0.05 |
| THEORETICAL COVERAGE |
122 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
75-85+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
HAA, TGIC-Free RAL Color
Note: Do not mix with previous TGIC versions. Ensure thorough gun cleaning between color changes to prevent cross-contamination.This weather-resistant powder coating is suitable for both interior and exterior applications. A clear coat is optional but recommended for added protection.For multi-stage coatings (2-3 layers), partially cure the base coat at 50-75% of the recommended time to allow the top coat to properly cross-link. This method results in the best possible bond between coats. Caution: Over-curing the base coat may lead to delamination between layers. |
My Account