We now have 2 versions of Dormant Purple.
Dorment Purple I has more of a deeper purple look
Dormant Purple II is a bit brighter and has a bit of a pinksh hue in it.
Being a polyurethane, it will smoke in the oven when curing.
You can not mix this with the old powder as they are different chemistries. Being a polyurethane, it will smoke in the oven when curing. This will go to a darker purple when a clear is applied heavier.
| pc1055 |
DORMANT PURPLE |
| CHEMISTRY |
POLYURETHANE GROUP B |
| REGULAR CURE TEMP |
375F 15 MIN |
| MIN TEMP |
350F 25 MIN |
| MAX TEMP |
400F 10 MIN |
| RECOMMENDED THICKNESS |
3.5-4.5 mils |
| PENCIL HARDNESS |
2-H |
| SPECIFIC GRAVITY |
NA |
| THEORETICAL COVERAGE |
150ft^2 /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
NA |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
100 in/lb |
| SDS Sheet info # |
#6A – Polyester TGIC (Group A) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| *Dormant Colours need a clear coat for the full colour to come through. *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings. |
Formulation Change Sept 14th 2022 do not mix with the previous version
***EMERALD COATINGS RECOMMENDS USING A CLEAR COAT TO BRING OUT DESIRED COLOR, YOU WILL NOT GET THE COLOR AND DEPTH UNLESS YOU USE A CLEAR COAT.
DORMANT RASPBERRY
DORMANT RASPBERRY ~ POLYESTER TGIC-FREE ~ GLOSS LEVEL = 80 – 90% GLOSS ~ CURE TIME = 392F/10-12 MIN @ PMT (PART METAL TEMPERATURE) ~ SPECIFIC GRAVITY = 1.2 – 1.8 ~ THEORETICAL COVERAGE = 51.5 SQ. FT./LB @ 1 MIL ~ RECOMMENDED MIL THICKNESS = 2.5 – 3.5 ~ SALT SPRAY RESULTS 500+ HOURS ~ ***MUST CLEAR COAT TO BRING OUT DESIRED COLOR, YOU WON’T GET THE LOOK UNLESS YOU USE A CLEAR COAT.
Neon Green single stage powder coating. Flows out smooth, high gloss polyester TGIC powder. Our brightest geen powder.
| PC1066 |
FLOURESCENT GREEN |
| CHEMISTRY |
POLYESTER TGIC A |
| REGULAR CURE SCHEDULE |
375F / 20 MIN |
| MIN RANGE |
356F / 25 MIN |
| MAX RANGE |
400F / 15 MIN |
| RECOMMENDED THICKNESS |
2.5-3.5 mils |
| PENCIL HARDNESS |
H |
| SPECIFIC GRAVITY |
1.4-1.8 g/cm3 |
| THEORETICAL COVERAGE |
51.5 ft2 /lb at 2.5 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-90 |
| SALT SPRAY |
500 hours |
| BALL IMPACT |
20 in/lb |
| SDS Sheet info # |
#6A – Polyester TGIC (Group A) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| This Product is not UV stable and should not be used outdoors as the sun may fade it. Even with a clear coat you still may see fading. *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. |
BLACK GOLD GLIMMER
POLYESTER TGIC
WITH INTERIOR LIGHTING THIS PRODUCT HAS A BLACK GOLD PEARLESCENT FINISH
BRING IN THE SUNLIGHT AND BAM! HERE COME’S THE GREEN AND GOLD FLAKE !
• GLOSS LEVEL = 80 -90% ON 60 DEGREE METER
• CURE SCHEDULE = 400F/10 MIN or 375/15min @ PMT
HARDNESS= H-2H
IMPACT RESISTANCE: UP TO 80 IN/LB
• RECOMMENDED MIL THICKNESS = 1.50 – 3.50 MILS
CROSS HATCH: 100%
• SALT SPRAY RESULTS = 1000+ HOURS
*** Clear coat recommended for exterior applications and improved mar resistance ***
JD AGRICULTURAL GREEN isn’t just a color—it’s a statement. It’s the perfect match for John Deere equipment and everything that means business. This smooth, glossy finish is so easy to work with, it practically does the job for you. Whether you’re coating agricultural parts, machinery, or anything that needs to look tough, John Deere Green gives you that “I’m ready to plow through anything” vibe with a high-quality shine. It’s the color that says, “I’m here to work, but I still look good doing it.
AGRICULTURAL GREEN FROM AXALTA IS MADE TO MATCH THE JOHN DEERE GREEN, AXALTA PART # PFG678S9 Name: Agricultural Green
| PC1096a |
JD AGRICULTURAL GREEN |
| CHEMISTRY |
POLYESTER TGIC Axalta |
| REGULAR CURE TEMP |
400F/10 min |
| MIN TEMP |
NA |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0-3.0 mils |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.31+/-0.05 |
| THEORETICAL COVERAGE |
147 ft2/lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
90+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
60 in/lb |
| SDS Sheet info # |
#6D – Polyester TGIC (AXALTA) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| Weather-resistant powder coating for both interior and exterior applications. A clear coat is not required but, can be added for extra protection.
When applying in 2-3 stages, cure the base coat for 50-75% of the recommended time to ensure proper bonding with the top coat. This curing method ensures the best possible bond between the layers. Over-curing the base coat can lead to delamination between the coatings. |
POWDER COATING PRIMER
KL, CLEAR BASE COAT POWDER COATING PRIMER (HYBRID)
| PC1100 |
KL PRIMER |
| CHEMISTRY |
HYBRID |
| REGULAR CURE TEMP |
12 Minutes@ 375°F |
| MIN TEMP |
NA |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
1.5 TO 3.5 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.6 +/- .05 |
| THEORETICAL COVERAGE |
56 sq/ft @ 2.0 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
NA |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
80 in/lb |
| SDS Sheet info # |
#3- Hybrids |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
KL PRIMER
HYBRID CLEAR BASE COAT, EXCELLENT FILLING AND SANDING CHARACTERISTICS MAKE THIS A GREAT CHOICE FOR ELIMINATING SURFACE IMPERFECTIONS AND CASTING MARKS ~ USE IN MULTIPLE COATS FOR FILM BUILDS . *SAFE FOR USE ON ALL SUBSTRATES INCLUDING ALUMINUM |
MAPLE BRONZE METALLIC POLYESTER TGIC BASED POWDER
WEATHERABLE, SPECIALTY FINISH POWDER THAT IS USED FOR DECORATIVE AND / OR FUNCTIONAL APPLICATIONS.
* CURE SCHEDULE:400F/10 MIN PMT * SEMI-GLOSS SMOOTH METALLIC * RECOMMENDED MIL THICKNESS- 2.0-3.0 MILS * SALT SPRAY RESULTS- 1,000+ HOURS
*** CLEAR COAT NEEDED FOR PROLONGED EXTERIOR USE AND IMPROVED MAR RESISTANCE.
Description
Phantom Flat Black is the flat black that everyone wants to be when they grow up. It’s smooth, easy to work with, and flows out to that perfect, smooth flat finish. This is our most popular flat black, because who doesn’t love a finish that looks tough but feels sleek? Whether you’re working on automotive parts or custom projects, Phantom Flat Black has your back. It’s the flat black that just works. Looking for similar finishes? Check out Black 20 Gloss, Black Magic, Black Matte Tuscan, and HD Flat Black— All cool options but not as popular as Phantom flat black
| PC1146 |
PHANTOM FLAT BLACK |
| CHEMISTRY |
POLYURETHANE |
| REGULAR CURE SCHEDULE |
15 Minutes@ 375°F |
| MIN RANGE |
NA |
| MAX RANGE |
NA |
| RECOMMENDED THICKNESS |
1.5 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.49 +/- .05 |
| THEORETICAL COVERAGE |
56 sq/ft @ 2.0 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
0-10 |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
80 in/lb |
| SDS Sheet info # |
#5A – Polyurethanes (Group A) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| Weather-resistant powder coating for both interior and exterior applications. A clear coat is not required but can be added for extra protection.
Curing Tips: When applying in 2-3 stages, cure the base coat for 50-75% of the recommended time to ensure proper bonding with the top coat. This method results in the best adhesion between layers. Over-curing the base coat may cause delamination. |
My Account
