3PC Impact Socket Adapt Set

Posted on April 8, 2022 by emerald

3PC Impact Socket Adapt Set

1/4-inch, 3/8-inch, and 1/2-inch Drive

Comments Off on 3PC Impact Socket Adapt Set

MASKING DOTS

Posted on January 31, 2022 by emerald

2MIL Green Polyester High Temperature powder coating tape. Green backing is 2Mil, good for 400F.

High temp powder coating tape is pressure sensitive, you must apply pressure to the tape after it has been applied to the sub-straight.

Comments Off on MASKING DOTS

PURPLE WAVE

Posted on November 2, 2021 by emerald

Axalta Purple wave

PC1216A PURPLE WAVE
CHEMISTRY POLYESTER TGIC A
REGULAR CURE TEMP 400F 10MIN
MIN TEMP
MAX TEMP
RECOMMENDED THICKNESS 3.5-4.0 mils
PENCIL HARDNESS H-2H
SPECIFIC GRAVITY 1.54 ± 0.05
THEORETICAL COVERAGE 125 ft /lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 140 / 140 in/lbs
SDS Sheet info # #6A – Polyester TGIC (Group A)
SDS link https://emeraldcoatings.com/sds-sheets/
This Product is transparent and will show the base coat through the finish.  It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat.  Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping.  Candy / transparent colours are considered tinted clear coats and have the durability and protection of a regular clear coat.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats.
Comments Off on PURPLE WAVE

JOLLIPOP CANDY PURPLE

Posted on October 29, 2021 by emerald

NEW AND NOW IN STOCK!!!!!! BRIGHT VIBRANT CANDY PURPLE

JOLLIPOP PURPLE FROM AXALTA, EXCELLENT HIGH GLOSS SMOOTH CANDY PURPLE FINISH.  NEEDS A BRIGHT SILVER OR CHROME BASE COAT,  FOR SILVER WE RECOMMEND USING THE FF SUPER SILVER II

PC1218A AXALTA JOLLIPOP PURPLE
CHEMISTRY POLYESTER TGIC Axalta
REGULAR CURE TEMP 400F/10 min
MIN TEMP NA
MAX TEMP NA
RECOMMENDED THICKNESS 2.0-3.0 mils
PENCIL HARDNESS H
SPECIFIC GRAVITY 1.22 +/- .05
THEORETICAL COVERAGE 158ft^2 /lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 90+
SALT SPRAY 1,000 hours
BALL IMPACT 100 in/lb
SDS Sheet info # SDS JOLIPOP PURPLE AXALTA
This Product is transparent and will show the base coat through the finish.  It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat.  Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping.  Candy / transparent colours are considered tinted clear coats and have the durability and protection of a regular clear coat.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats.

 

Comments Off on JOLLIPOP CANDY PURPLE

AXALTA JOLLIPOP CANDY BRASS

Posted on October 29, 2021 by emerald

JOLLIPOP BRASS FROM AXALTA, EXCELLENT HIGH GLOSS SMOOTH CANDY BRASS FINISH.  NEEDS A BRIGHT SILVER OR CHROME BASE COAT,  FOR SILVER WE RECOMMEND USING THE FF SUPER SILVER II

Jollipop Brass is a little more difficult to spray than most candy colours.  Being a very light candy, it can change in shade depending on the thickness.  We recommend spraying test panels before committing to a job with this colour.  If sprayed too thick, it will turn orange.  Brass and gold candy colours are the hardest to spray out of all candy colours.  

PC1061 AXALTA JOLLIPOP BRASS
CHEMISTRY POLYESTER TGIC Axalta
REGULAR CURE TEMP 400F/10 min
MIN TEMP NA
MAX TEMP NA
RECOMMENDED THICKNESS 2.0-3.0 mils
PENCIL HARDNESS H
SPECIFIC GRAVITY 1.22 +/- .05
THEORETICAL COVERAGE 158ft^2 /lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 90+
SALT SPRAY 1,000 hours
BALL IMPACT 100 in/lb
SDS Sheet info # SDS JOLIPOP BRASS AXALTA
SDS link SDS JOLIPOP BRASS AXALTA
This Product is transparent and will show the base coat through the finish.  It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat.  Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping.  Candy / transparent colours are considered tinted clear coats and have the durability and protection of a regular clear coat.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats.

 

Comments Off on AXALTA JOLLIPOP CANDY BRASS

AXALTA JOLLIPOP CANDY COPPER

Posted on October 29, 2021 by emerald

NEW AND NOW IN STOCK!!!!!! BRIGHT VIBRANT CANDY COPPER

JOLLIPOP COPPER FROM AXALTA, EXCELLENT HIGH GLOSS SMOOTH CANDY COPPER FINISH.  NEEDS A BRIGHT SILVER OR CHROME BASE COAT,  FOR SILVER WE RECOMMEND USING THE FF SUPER SILVER II

PC1041A AXALTA JOLLIPOP COPPER
CHEMISTRY POLYESTER TGIC Axalta
REGULAR CURE TEMP 400F/10 min
MIN TEMP NA
MAX TEMP NA
RECOMMENDED THICKNESS 2.0-3.0 mils
PENCIL HARDNESS H
SPECIFIC GRAVITY 1.22 +/- .05
THEORETICAL COVERAGE 158ft^2 /lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 90+
SALT SPRAY 1,000 hours
BALL IMPACT 100 in/lb
SDS Sheet info # SDS JOLIPOP COPPER AXALTA
SDS link SDS JOLIPOP COPPER AXALTA
This Product is transparent and will show the base coat through the finish.  It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat.  Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping.  Candy / transparent colours are considered tinted clear coats and have the durability and protection of a regular clear coat.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats.

 

Comments Off on AXALTA JOLLIPOP CANDY COPPER

AXALTA JOLLIPOP CANDY GREEN

Posted on October 29, 2021 by emerald

NEW AND NOW IN STOCK!!!!!! BRIGHT VIBRANT CANDY GREEN

JOLLIPOP GREEN FROM AXALTA, EXCELLENT HIGH GLOSS SMOOTH CANDY GREEN FINISH.  NEEDS A BRIGHT SILVER OR CHROME BASE COAT,  FOR SILVER WE RECOMMEND USING THE FF SUPER SILVER II

PC1044 AXALTA JOLLIPOP GREEN
CHEMISTRY POLYESTER TGIC Axalta
REGULAR CURE TEMP 400F/10 min
MIN TEMP NA
MAX TEMP NA
RECOMMENDED THICKNESS 2.0-3.0 mils
PENCIL HARDNESS H
SPECIFIC GRAVITY 1.22 +/- .05
THEORETICAL COVERAGE 158ft^2 /lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 90+
SALT SPRAY 1,000 hours
BALL IMPACT 100 in/lb
SDS Sheet info # SDS JOLIPOP GREEN AXALTA
SDS link SDS JOLIPOP GREEN AXALTA
This Product is transparent and will show the base coat through the finish.  It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat.  Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping.  Candy / transparent colours are considered tinted clear coats and have the durability and protection of a regular clear coat.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats.

 

Comments Off on AXALTA JOLLIPOP CANDY GREEN

SEAFOAM

Posted on October 21, 2021 by emerald

One Hit Wonder is a ready-to-spray paint formulated specifically for the hydrographic process. One Hit Wonder’s unique formula eliminates the need to add reducers, apply separate primers or adhesion promoters. You simply degrease, scuff, apply One Hit Wonder and dip.

FEATURES

  • Ready-to-Spray
  • Will Not Rust Metal
  • Will Not Freeze in Cold Weather
  • Exceptional Coverage
  • 18 Month Dip Window
  • Chemically Bonds with Film and Clear Coat
  • Improved Formula with Superior Activator Resistance (paint does not go soft after dipping)
  • Direct to Metal, Plastic*, Fiberglass, Wood, Bone, Chrome, Stainless Steel, Glass, Previously Painted Parts and More

CHOOSING A COLOR

Select your color the same way you would select a basecoat. Since water transfer film is semi-transparent, pick a paint color that compliments your film. Please note that you can mix different One Hit Wonder colors to create your own variations. We recommend keeping brites with brites.

*HDPE plastic require flame treatment before degrease and scuff.

Comments Off on SEAFOAM

METALLIC MAGENTA

Posted on October 21, 2021 by emerald

One Hit Wonder is a ready-to-spray paint formulated specifically for the hydrographic process. One Hit Wonder’s unique formula eliminates the need to add reducers, apply separate primers or adhesion promoters. You simply degrease, scuff, apply One Hit Wonder and dip.

FEATURES

  • Ready-to-Spray
  • Will Not Rust Metal
  • Will Not Freeze in Cold Weather
  • Exceptional Coverage
  • 18 Month Dip Window
  • Chemically Bonds with Film and Clear Coat
  • Improved Formula with Superior Activator Resistance (paint does not go soft after dipping)
  • Direct to Metal, Plastic*, Fiberglass, Wood, Bone, Chrome, Stainless Steel, Glass, Previously Painted Parts and More

CHOOSING A COLOR

Select your color the same way you would select a basecoat. Since water transfer film is semi-transparent, pick a paint color that compliments your film. Please note that you can mix different One Hit Wonder colors to create your own variations. We recommend keeping brites with brites.

*HDPE plastic require flame treatment before degrease and scuff.

Comments Off on METALLIC MAGENTA

6″ 1/2 hp Buffing Machine

Posted on October 21, 2021 by emerald

Light Duty Cast Iron Buffing and Polishing Machine

1/2HP 3450RPM Motor 120/240V

  • Easily remove scratches and other imperfections, brings out the natural luster of the metal, and can effectively clean, polish, finish, and buff a wide variety of materials
  • Each unit is equipped with a strong, powerful motor that supplies the necessary torque for start-up and operation under load
  • Large diameter armature shaft with shielded bearings for smooth operation
  • Heavy duty cast iron construction for vibration free operation
  • CSA approved OSHA compliant
  • 1/2 Inch Diameter Shaft
  • 120V 5 amp draw / 240V 2.5 amp draw – Single Phase
  • 22 lbs
  • 3 Year Warranty
  • Does not include buffing wheels
  • Run with 6″ wheels
  •  

​​​​​​​

 

 

 

 

Comments Off on 6″ 1/2 hp Buffing Machine

8″ 1HP Variable Speed Buffer

Posted on October 21, 2021 by emerald
These deluxe variable speed buffers deliver the power, precision and versatility to handle a wide range of finishing applications. At maximum rpm’s they are built for intermediate blending, polishing and surface conditioning applications. At the lower rpm range they effectively handle the more delicate final finishing, polishing, buffing and surface finish refinement operations.

  • Equipped with the latest technology variable speed inverter delivering a broad range of continuous speeds to fit any application
  • Powerful, heavy-duty capacitor motors provide additional torque and provide plenty of power at all speeds without any loss of rpm’s at full load
  • LED speed readout with “soft” touch on/off and variable speed control pad
  • 3 hard speed switch settings 900 / 1800 / 3600 RPM. Press the high or low switch button on touch pad to variably adjust the speed up or down in 100 RPM increments from the hard rpm setting
  • Dynamically balanced rotors and sealed bearings to minimize vibration and ensure smooth running operation
  • Extended wheel to wheel clearance
  • 1HP 900RPM – 3600RPM in 100 RPM intervals
  • 5/8″ Shaft Diameter
  • 115V/12 Amps or 240V/6 Amps
  • 3 Year Warranty
  • Does Not Include Buffing Wheels

 

 

 

 

Comments Off on 8″ 1HP Variable Speed Buffer

8″ 3/4HP 3450 RPM Buffing Machine

Posted on October 21, 2021 by emerald

8″ 3/4HP 3450 RPM Buffing Machine

Palmgren’s buffing machines easily remove scratches and other imperfections, brings out the natural luster of the metal, and can effectively clean, polish, finish, and buff a wide variety of materials. Each unit is equipped with a strong, powerful motor that supplies the necessary torque for start-up and operation under load.

  • Large diameter armature shaft with shielded bearings for smooth operation
  • Heavy duty cast iron construction for vibration free operation
  • CSA approved OSHA compliant
  • Units fit 9670101 tool stand
  • Runs with 8″ wheels

​​​​​​​

 

 

 

 

Comments Off on 8″ 3/4HP 3450 RPM Buffing Machine

RAL 9006 WHITE ALUMINIUM (METALLIC)

Posted on August 10, 2021 by emerald
RAL9007A RAL 9006 WHITE ALUMINIUM
CHEMISTRY POLYESTER TGIC-FREE
REGULAR CURE TEMP 375F/10 MIN
MIN TEMP 350F/15 MIN
MAX TEMP NA
RECOMMENDED THICKNESS 2.0-3.0 mils
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.47 +/- 0.05
THEORETICAL COVERAGE 131 ft /lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 70-80
SALT SPRAY 1,000 hours
BALL IMPACT 160 in /lbs
SDS Sheet info # #4 – Polyester TGIC Free
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.
Comments Off on RAL 9006 WHITE ALUMINIUM (METALLIC)

RAL 9007 GREY ALUMINIUM (METALLIC)

Posted on August 10, 2021 by emerald
RAL9007A RAL 9007 GREY ALUMINIUM
CHEMISTRY POLYESTER TGIC-FREE
REGULAR CURE TEMP 375F/10 MIN
MIN TEMP 350F/15 MIN
MAX TEMP NA
RECOMMENDED THICKNESS 2.0-3.0 mils
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.47 +/- 0.05
THEORETICAL COVERAGE 131 ft /lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 70-80
SALT SPRAY 1,000 hours
BALL IMPACT 160 in /lbs
SDS Sheet info # #4 – Polyester TGIC Free
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.
Comments Off on RAL 9007 GREY ALUMINIUM (METALLIC)

AXALTA PLATINUM SPARKLE IV

Posted on May 4, 2021 by emerald

PLATINUM SPARKLE IV (PFA672M7) SMOOTH DARKER LOOKING SILVER  FROM AXALTA POWDER COATING.

 

 

PC1145a Stardust Silver III
CHEMISTRY Polyester TGIC (AXALTA)
REGULAR CURE TEMP 400F 10-15 MIN
MIN TEMP NA
MAX TEMP NA
RECOMMENDED THICKNESS 2.0-3.0 mils
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.49 ± 0.05
THEORETICAL COVERAGE 129ft^2 /lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) NA
SALT SPRAY 1,000 hours
BALL IMPACT 160 in/lb
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.

Comments Off on AXALTA PLATINUM SPARKLE IV

BLACK CARBIDE TEXTURE

Posted on May 4, 2021 by emerald

Black Carbide Texture Powder Coating

The Black Carbide Texture Powder Coating is a fine-textured black coating that is easy to apply and delivers long-lasting durability. This product has quickly become our go-to black texture due to its smooth application and excellent performance on both interior and exterior surfaces. Ideal for automotive and ATV parts, as well as other high-usage items, it offers a rich, deep black finish with a fine texture that is highly resistant to wear and tear.

Product Specifications

Specification Details
Product Code PC1175
Chemistry Polyester TGIC-Free
Regular Cure Temp 400°F for 10 minutes
Recommended Thickness 2.0-3.0 mils
Pencil Hardness H
Specific Gravity 1.57 ±0.05
Theoretical Coverage 122 sqft per pound per mil
Salt Spray Resistance 1,000 hours
Ball Impact Resistance 120 in/lb

When using in multiple coats, Cure the base/primer coat at 50-75% of the recommended time for better bonding with the top coat.  Follow the full curing schedule of the final coat to achieve the best results in durability and finish.  This weather-resistant powder coating is suitable for both interior and exterior applications. For exterior use, we recommend applying a zinc-rich primer over steel parts for extra protection.

Recommended Colors for Similar Finishes

If you’re looking for other textured finishes, check out these options:

Black Carbide Texture Powder Coating


Black Carbide Texture Powder Coating


Black Carbide Texture Powder Coating

Comments Off on BLACK CARBIDE TEXTURE