FORMULATION CHANGE **As of July 8th 2022, this colour has changed, to the Axalta HHA TGIC Free formulation. Do not mix this powder with previous batches.
AXALTA RAL 1015
| ral6010A |
6011 RESEDA GREEN (NEW TGIC FREE VERSION, do not mix with old version) |
| CHEMISTRY |
HAA POLYESTER TGIC FREE |
| REGULAR CURE TEMP |
375F/10 MIN |
| MIN TEMP |
0 |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.49 ± 0.05 |
| THEORETICAL COVERAGE |
129 ft /lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-90+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
160 in/lbs |
| SDS Sheet info # |
#15 HAA POLYESTER TGIC FREE |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| HAA, TGIC FREE, RAL COLOUR, DO NOT MIX WITH PREVIOUS TGIC VERSION, ENSURE GOOD GUN CLEANING BETWEEN COLOUR CHANGES TO PREVENT CROSS CONTAMINATION. WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
CANDY BLUE WITH A FINE SPARKLE IN THE FINFISH
| MC1081 |
TWILIGHT CANDY BLUE |
| CHEMISTRY |
POLYESTER TGIC A |
| REGULAR CURE TEMP |
375F 13-20 MIN |
| MIN TEMP |
356F 15-25 MIN |
| MAX TEMP |
400F 10-15 MIN |
| RECOMMENDED THICKNESS |
2.5-3.5 mils |
| PENCIL HARDNESS |
H minimum |
| SPECIFIC GRAVITY |
1.2-1.8 g/cm3 |
| THEORETICAL COVERAGE |
51.5 ft2 /lb at 2.5 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-95+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
20 in/lb |
| SDS Sheet info # |
#6A – Polyester TGIC (Group A) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| This Product is transparent and will show the base coat through the finish. It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat. Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping. Candy / transparent colours are considered tinted clear coats and have the durability and protection of a regular clear coat. *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. |
Shaw Naughty Designz Hydrographic film
MR. CREEPY
Length per quantity is 5 meters long
We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products. All sale films will be sold in 5-meter rolls at a time. All sale films will be discontinued after they are sold out, once it’s gone it’s gone.
Shaw Naughty Designz Hydrographic film
TAKTIKEL
Length per quantity is 5 meters long
We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products. All sale films will be sold in 5-meter rolls at a time. All sale films will be discontinued after they are sold out, once it’s gone it’s gone.
SHANK MOUNTED WHEEL (3″ x 1/2″ x 1/4″ SHAFT)
Spiral sewn wheels are the workhorse of most buffing and polishing jobs. Because the plies of cotton cloth are sewn together spirally, the wheel becomes much harder and more pressure can be exerted on it. This is especially useful when ‘cutting’ the metal. The faces of these wheels are pre-raked to accept compound immediately
Up To 5,000 RPM
Great way to buff and polish parts with a cordless drill.
Pick up one of our Extension bit holders to get some extra leverage and flexibility
Check out the Standard wheel and compound buffing guide for more information on Standard compounds and buffing wheels
SHANK MOUNTED WHEEL (2.5″ x 1/2″ x 1/4″ SHAFT)
Spiral sewn wheels are the workhorse of most buffing and polishing jobs. Because the plies of cotton cloth are sewn together spirally, the wheel becomes much harder and more pressure can be exerted on it. This is especially useful when ‘cutting’ the metal. The faces of these wheels are pre-raked to accept compound immediately
Up To 5,000 RPM
Great way to buff and polish parts with a cordless drill.
Pick up one of our Extension bit holders to get some extra leverage and flexibility
Check out the Standard wheel and compound buffing guide for more information on Standard compounds and buffing wheels
SHANK MOUNTED WHEEL (1″ x 3/8″ x 3/32″ SHAFT)
Up To 5,000 RPM
For use in small areas with dremel or other rotary tools. Comes without shaft.
3/4″ dia. x 1/2″h
3/4″ Wide x 1″ High x 1/4″ Shaft
Up To 20,000 RPM
3/4″w x 1.5″h x 1/4″ shaft
Up To 20,000 RPM
3/4″ Wide x 3/4″ High x 1/4″ Shaft
Up To 20,000 RPM
3/4″ Wide x 1″ High x 1/4″ Shaft
Up To 20,000 RPM
These felt bobs are a medium/hard felt with industrial quality, which gives them a long life. They are designed to be used with all our compounds to cut and polish and get in all the small places where wheels can’t get.
Up To 20,000 RPM
- 2″ Diameter x 2″ Long
- 1/4″ Shaft
Ideal for buffing contoured items. Mounts in most chucks.
Ideal for buffing contoured shapes such as wheels. Mounts in most chucks. Scrubber wheels remove rust, scratches, minor blemishes, old paint, and plating.
Use a light touch. No compound is required, as the abrasive is already impregnated in the wheel. Gives metal a “satin” appearance.
2.5″, 3.5″, 4.5″ or kit (all 3)
1/4″ Shaft.
My Account