Stacked Deck

Posted on June 16, 2015 by emerald

Hydromonkeys in Canada

Stacked Deck

Incredibly detailed film with a range of completely custom demonic playing cards falling into the abyss. Black on clear for any base colour.

 

 

 

Film Width: 100cm

 

Length sold by the meter

 

Comments Off on Stacked Deck

Dark Classic wood grain (5 meter roll SALE)

Posted on June 6, 2015 by emerald

Dark classic wood grain

Length per quantity is 5 meters long

We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products.  All sale films will be sold in 5-meter rolls at a time.  All sale films will be discontinued after they are sold out, once it’s gone it’s gone. 

Comments Off on Dark Classic wood grain (5 meter roll SALE)

GOLD FLORAL

Posted on June 6, 2015 by emerald

GOLD FLORAL

GOLD (NOT WHITE AS PICTURE SHOWS)FLORAL DESIGN ON Transparent Film

Length sold by the Meter

Comments Off on GOLD FLORAL

OIL SLICK (50 CM WIDE)

Posted on June 6, 2015 by emerald

OIL SLICK (50 CM WIDE)

Length sold by the Meter

Comments Off on OIL SLICK (50 CM WIDE)

Two tone ash (5 meters for $25.00 SALE)

Posted on June 6, 2015 by emerald

Two tone ash

Length per quantity is 5 meters long

We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products.  All sale films will be sold in 5-meter rolls at a time.  All sale films will be discontinued after they are sold out, once it’s gone it’s gone.

THIS IS A PREMIUM PVA FILM PRINTED ON THICK 35 MICRON FILM.

Comments Off on Two tone ash (5 meters for $25.00 SALE)

Cherry Wood

Posted on June 5, 2015 by emerald

Cherry Wood

Length sold by the Meter

Comments Off on Cherry Wood

WARFARE (50 CM WIDE)

Posted on June 5, 2015 by emerald

WARFARE (50 CM WIDE)

Length sold by the Meter

Comments Off on WARFARE (50 CM WIDE)

TRIBAL TALONS

Posted on May 25, 2015 by emerald

TRIBAL TALONS

Length sold by the Meter

Comments Off on TRIBAL TALONS

SCREAMING SHOCKED GREEN

Posted on May 11, 2015 by emerald
MC1101 SCREAMING SHOCKED GREEN
CHEMISTRY POLYESTER TGIC A
REGULAR CURE TEMP 375F 13-20 MIN
MIN TEMP 356F 15-25 MIN
MAX TEMP 400F 10-15 MIN
RECOMMENDED THICKNESS 2.5-3.5 mils
PENCIL HARDNESS H
SPECIFIC GRAVITY 1.2-1.8 g/cm8
THEORETICAL COVERAGE 51.5 ft2 /lb at 2.5 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 20 in/lb
SDS Sheet info # #6A – Polyester TGIC (Group A)
SDS link https://emeraldcoatings.com/sds-sheets/
This Product is transparent and will show the base coat through the finish.  It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat.  Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Due to the bright pigments used in this product, the  UV stability is reduced in comparison to other candy colours.  This will also be more prone to areas with lower film build.   Fading may occur when used in areas with high UV exposure.
Comments Off on SCREAMING SHOCKED GREEN

POISON FLAME

Posted on May 6, 2015 by emerald
CHEMISTRY POISON FLAME
CHEMISTRY Polyester TGIC Metallic
REGULAR CURE TEMP 375F/10 MIN
MIN TEMP 350F/15 MIN
MAX TEMP 400F/7 MIN
RECOMMENDED THICKNESS 2.5 TO 3.5 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.37 +/- .05
THEORETICAL COVERAGE 56 sq/ft @ 2.5 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 120 in/lb
SDS Sheet info # #9 – Polyester TGIC Metallic
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.
Comments Off on POISON FLAME

HEAVY METAL WHITE

Posted on May 6, 2015 by emerald
MC1040 HEAVY METAL WHITE
CHEMISTRY Polyester TGIC Metallic
REGULAR CURE TEMP 375F 13-20 MIN
MIN TEMP 356F 15-25 MIN
MAX TEMP 400F 10-15 MIN
RECOMMENDED THICKNESS 1.5 TO 3.5 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.83 +/- .05
THEORETICAL COVERAGE 56 sq/ft @ 2.0 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 80 in/lb
SDS Sheet info # #9 – Polyester TGIC Metallic
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.

 

 

 

Comments Off on HEAVY METAL WHITE

HEAVY METAL YELLOW

Posted on May 6, 2015 by emerald
MC1039 HEAVY METAL YELLOW
CHEMISTRY Polyester TGIC Metallic
REGULAR CURE TEMP 375F 13-20 MIN
MIN TEMP 356F 15-25 MIN
MAX TEMP 400F 10-15 MIN
RECOMMENDED THICKNESS 2.5-3.5 mils
PENCIL HARDNESS 2H minimum
SPECIFIC GRAVITY 1.2-1.8 g/cm3
THEORETICAL COVERAGE 51.5 ft2 /lb at 2.5 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 80 in/lb
SDS Sheet info # #9 – Polyester TGIC Metallic
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.

 

 

Comments Off on HEAVY METAL YELLOW

ENCRYPTED

Posted on April 30, 2015 by emerald

From Hydro Style UK

One of a kind. Digital theme with great variation. Black and clear so a multitude of base coats can be used. 100cm Wide. Black ink only.

Comments Off on ENCRYPTED

ENERGY ORANGE PEARL

Posted on April 27, 2015 by emerald
MC1026 ENERGY ORANGE PEARL
CHEMISTRY Polyester TGIC Metallic
REGULAR CURE TEMP 375F/10 MIN
MIN TEMP 350F/15 MIN
MAX TEMP 400F/7 MIN
RECOMMENDED THICKNESS 2.5 TO 4.0 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.40 +/- .05
THEORETICAL COVERAGE 55 sq/ft @ 2.5 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY n/a
BALL IMPACT 120 in/lb
SDS Sheet info # #9 – Polyester TGIC Metallic
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.
Comments Off on ENERGY ORANGE PEARL

RAL 7002

Posted on April 24, 2015 by emerald
RAL7002 RAL 7002A OLIVE GREY
CHEMISTRY SD POLYESTER TGIC
REGULAR CURE SCHEDULE 375F/10 MIN
MIN RANGE 350F/15 MIN
MAX RANGE 400F/7 MIN
RECOMMENDED THICKNESS 2.0 TO 3.0 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.49 +/- .05
THEORETICAL COVERAGE 65 sq/ft @ 2 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 120 in/lb
WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, CLEAR COAT IS NOT NEEDED BUT WILL ADD EXTRA PROTECTION.   When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings.

 

 

 

Comments Off on RAL 7002

COSMIC DREAMS

Posted on April 17, 2015 by emerald

Hydromonkeys

COSMIC DREAMS (100CM)

Lots of vibrant colours and detail in a space-scene – lots of people have been asking for a film like this, and here it is – the first one to market!

Film Width: 100cm

Comments Off on COSMIC DREAMS