My Account
Demon Gambler
Black and clear film.
This is a 100cm wide film, all films are sold by the Meter
site info + updates
Demon Gambler
Comments Off on Demon Gambler
Revolver Skulls
Revolver Skulls
Black and clear film
This is a 100cm wide film, all films are sold by the Meter
Comments Off on Revolver Skulls
Fire Camo
Fire Camo
Full colour fire camo, great film to use with many different uses.
This is a 100cm wide film, all films are sold by the Meter
Comments Off on Fire Camo
Purple Camo
Purple Camo
Full colour Purple camo, great film.
This is a 100cm wide film, all films are sold by the Meter
Comments Off on Purple Camo
EvapoRust
Product Description
EVAPO-RUST™ works through selective chelation. This is a process in which a large synthetic molecule forms a bond with metals and holds them in solution. Most chelating agents bind many different metals. The active ingredient in EVAPO-RUST™ bonds to iron exclusively. It can remove iron from iron oxide but is too weak to remove iron from steel where the iron is held much more strongly. Once the chelating agent has removed the iron, a sulfur bearing organic molecule pulls the iron away from the chelator and forms a ferric sulfate complex which remains water soluble. This frees the chelating agent to remove more iron from rust.
Evapo-Rust is highly recommended by the NRA Gunsmithing School and will remove blueing, browning, zinc phosphate, zinc plating and cadmium plating in approximately 30 minutes. It will not harm solder points or lead and preps the surface for refinishing like no other product.
- Removes rust in as little as 5 minutes
- Non-toxic, non-corrosive, safe on skin
- No fumes or bad odors, non-flammable, no VOC’s
- Biodegradable, water soluble
- Easy to use – Soak part in room temperature solution
- Requires no special equipment
- No acids, bases, solvents or other toxic ingredients
- Will not harm unrusted steel, safe on other metals
- Can be disposed of safely into sewer
- One gallon derusts up to 300 pounds of heavily rusted steel
- An excellent rust inhibitor
- Will not affect plastic, PVC, Viton and most paints
Comments Off on EvapoRust
InstaCrete Epoxy 4 oz
InstaCrete Epoxy Putty Stick is a hand-kneadable, fast-setting polymer compound for permanent repairs to concrete and masonry. It also bonds to metals, wood, glass and many plastics. It comes in a handy “Tootsie-roll®” form with the curing agent encapsulated in the contrasting color base material.
Product Description
InstaCrete is a hand-mixable, fast-setting epoxy putty that quickly repairs
concrete and masonry. It also bonds to metals, wood, glass, and many
plastics. After mixing, it forms a concrete repair polymer that cures to a
concrete-like color and texture. Each handy stick contains pre-measured
portions of activator and base throughout — no measuring or mixing tools
are necessary. The consistency (like modeling clay) eliminates drips and
runs, facilitates adhesion to the substrate, and allows the material to be
shaped and formed as needed before curing begins. After 60 minutes the
application can be drilled, sawed, filed, tapped, and painted. Suitable for
interior or exterior use, it is resistant to water, chemicals, and temperature
extremes. InstaCrete contains no solvents or VOCs. It’s non-flammable and
releases no noxious fumes. It won’t shrink or pull away. The unused
portion stays fresh for future use when saved in its original package.
Performance Data*
SHELF LIFE AT 75°F (24°C) 24 months minimum
SHORE D HARDNESS AT FULL CURE (24 hrs) 80
LAP SHEAR TENSILE STRENGTH
On steel (1″ x 1″ x 1/16″) 700 lbs (4.8 MPa)
On concrete Concrete failure
COMPRESSIVE STRENGTH 8,000 psi (55 MPa)
SHRINKAGE <1%
NON-VOLATILE CONTENT 100%
DIELECTRIC STRENGTH 300 volts/mil
TEMPERATURE LIMITS
Continuous -40° to 250°F (-40° to 121°C)
Intermittent -40° to 300°F (-40° to 149°C)
CHEMICAL RESISTANCE
Resistant to hydrocarbons, ketones, alcohols, esters,
halocarbons, aqueous salt solutions and dilute acids
and bases.
NOT INTENDED FOR STRUCTURAL APPLICATIONS
InstaCrete Canada
your Canadian distrubitor
Comments Off on InstaCrete Epoxy 4 oz
FastSteel Epoxy – 4 oz.
|
“Don’t weld it, FASTSTEEL it!”
|
|
||||
| FASTSTEEL® is a hard kneadable, steel-reinforced, epoxy putty adhesive sealant that mixes in just one minute to provide fast repairs to items made of ferrous and aluminum metals. it comes in a handy four-ounce “tootsie-roll” form with the curing agent encapsulated in the consistency eliminates drips and runs, providing “no mess” applications with no tools required for use.
|
|||||
Comments Off on FastSteel Epoxy – 4 oz.
Aquamend Epoxy – 4 oz.
|
“No Boat Should be Without it”
|
|
||||
|
After proper mixing, AQUAMEND® molds like clay and may be used to patch dings, scratches, cuts, gouges, and holes in fiberglass, metal, and wooden boat decks and hulls; to repair fittings, pipes, electrical connections, leaking gaskets, water tanks, fish boxes, tubs, battery cases, sinks, spas, hot tubs, tanks, pools; to form custom gaskets, etc. |
|||||
Comments Off on Aquamend Epoxy – 4 oz.
Aluminum Brightener
Cleans and brightens aluminum, stainless steel, copper, brass, and non-ferrous metals. In just seconds, the industrial strength formula dissolves grease, oil stains, grime and road film. Dilute 4-6 oz per gallon of water depending on the cleaning job.
Ideal for brightening aluminum before anodizing. Reduces buffing time and effort.
1 gallon
Corrosive material. Cannot be air shipped.
DANGEROUS GOODS FEE APPLIES.
Comments Off on Aluminum Brightener
Coated Abrasive Grease Stick Grade F-90
A WHITE TALLOW BASE LUBRICANT WITH A HIGH MELTING POINT. Ideal for use with our Expanding Wheel Belts.
Grade F-90 is a pure tallow base mixture. Its purpose is to serve as a lubricant and at the same time, fill and close the belt with a heavy bodied grease film. The object of such a heavy bodied grease film on the belt may be two-fold. When applied to fine grit size coated abrasive belts, it permits a glazing or burnishing action. When applied to coarse grit belt operations the grease film is heavy enough to stay on the belt under severe conditions.
Product # 515-6051
Grade F-90
Comments Off on Coated Abrasive Grease Stick Grade F-90
Coated Abrasive Grease Stick Grade F-26
ALL PURPOSE LUBRICANT FOR BELTS AND DISCS. Ideal for use with our Expanding Wheel Belts .
This is the “original” and ever popular F-26 coated abrasive grease stick that is in universal use. The regular type polishing wheel grease sticks are purposely made of high melting point greases, but abrasive belts run so cool that these types of greases have a tendency to form a “gummy” surface referred to as “loading” or “glazing”. The use of F-26 on belts and discs prevents this. It is a light bodied grease – that spreads out thinly – remains “wet” on the belt – and provides lubrication by penetrating the coated abrasive surface. F-26 prevents clogging and leaves the abrasive grit free to cut clean and smooth.
Grade F-26 is recommended for all belt-polishing operations – on all metals, plastics and glass.
Comments Off on Coated Abrasive Grease Stick Grade F-26
Cartridge Rolls
Cartridge rolls are cylinders of abrasive cloth, which allow a new cutting surface to be uncovered as each layer is worn away. Good for cylinder head polishing, flash removal, deburring, tool-mark removal, wood carving and more. Aluminum oxide resin-bond with cloth backing assures trouble free, long lasting performance, even at speeds up to 20,000 RPM.
Starter Kit contains:
- Precision machined, cold rolled steel mandrel (1/4″ Shaft, 2.5″ long)
- 6 cartridge rolls (1/2″ dia x 1″ long)
- 1 x Fine (120 Grit) Tapered Roll
- 1 x Medium (80 Grit) Tapered Roll
- 1 x Coarse (60 Grit) Tapered Roll
- 1 x Fine Regular Roll
- 1 x Medium Regular Roll
- 1 x Coarse Regular Roll
Comments Off on Cartridge Rolls
Buffing Wheel Cement
For use with the Aluminum Oxide. Using a knife or spatula, the thixotropic adhesive is spread evenly around the face of your wheel.
Make your own abrasive wheels with our Aluminum Oxide and Aluminum Oxide.
Roll the wheel into the abrasive using light pressure, ensuring a heavy pickup of the abrasive.
Leave the coated wheel to air dry for several hours prior to use. Subsequent applications will provide a longer lasting system. Gentle heat from an oven will speed up drying times considerably.
As the system wears off, the wheel may be retreated numerous times.
For use with
8 oz./32 oz./1 gal.
Comments Off on Buffing Wheel Cement
Aluminum Oxide
Make your own abrasive wheels with our Buffing Wheel Cement and Aluminum Oxide.
80 Grit, 120 grit, 180 grit, 240 grit, or 320 grit.
1 lb.
For use with buffing wheel cement. Apply cement evenly onto a buffing wheel, then lightly roll the wheel in the Aluminum Oxide grit of choice. Leave the coated wheel to air dry for several hours prior to use. Subsequent applications will provide a longer lasting system. Gentle heat from an oven will speed up drying times considerably. As the oxide wears off, the wheel may be retreated numerous times.
Comments Off on Aluminum Oxide
Abrasive Wheel System
LOW COST FLEXIBLE GRINDING WHEEL
For use on your buffing machine!
Much more abrasive than the toughest greaseless compounds
Cuts through: PAINT, RUST, PLATING
Grinds away: SHARP EDGES, PITS, SCRATCHES, Parting Lines, Mold Marks, Tool & Die MARKS, STRETCHED METAL MARKS, BURRS ETC.
The Abrasive Wheel System comprises of a special adhesive, and a tough 80 grit aluminum oxide powder.
One the adhesive has hardened on the wheel of your choice, (usually a spiral sewn buffing wheel) the wheel is transformed into a tough, yet somewhat flexible grinding wheel, capable of grinding of plating, paint, rust, and smoothing out all metals.
The system is ideal for making felt bobs more abrasive.
Abrasive Wheel Kit:
1 x 8oz Buffing Wheel Cement
1 x 1lb Aluminum Oxide 80 grit
Comments Off on Abrasive Wheel System
Powder Coating EZ Gun Cup (1 cup)
Gun Cup for EZ50 and EZ100 Red Line Powder Coating System
PRICE IS FOR ONE CUP
Comments Off on Powder Coating EZ Gun Cup (1 cup)