INDUSTRIAL WHITE.
NICE CLEAN GLOSS WHITE
| PC1221 |
Industrial White |
| CHEMISTRY |
POLYURETHANE GORUP A |
| REGULAR CURE TEMP |
400F/15 min |
| MIN TEMP |
NA |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
1.5-2.5 mils |
| PENCIL HARDNESS |
2-H |
| SPECIFIC GRAVITY |
1.74 +/-0.05 g/cm³ |
| THEORETICAL COVERAGE |
110.5sq.ft/lb/mil |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
80-95+ |
| SALT SPRAY |
1,000 hours |
| BALL IMPACT |
60 in/lb |
| SDS Sheet info # |
#5A – Polyurethanes (Group A) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. |
VIKING GOLD METALLIC
SD POLYESTER TGIC METALLIC
* CURE SCHEDULE = 400F/10 MIN @ PART METAL TEMPERATURE
GLOSS LEVEL 65-75% ON 60 DEGREE METER
SPECIFIED GRAVITY 1.58 +/- 0.05 G/CM3
THEORETICAL COVERAGE 61 SQ.FT @ 2 MIL
FILM THICKNESS 2.0-3.0 MILS
SALT SPRAY 3000+ HOURS
*** CLEAR COAT NEEDED. EMERALD COATINGS RECOMMENDS A CLEAR FOR PROLONGED EXTERIOR USE AND IMPROVED MAR RESISTANCE.
gold powder
BLACK STARLIGHT (Black with a silver flake)
| PC1218 |
Black Starlight |
| CHEMISTRY |
SD POLYESTER TGIC |
| REGULAR CURE TEMP |
10 Minutes@ 400°F |
| MIN TEMP |
NA |
| MAX TEMP |
NA |
| RECOMMENDED THICKNESS |
2.0 TO 3.0 MILS |
| PENCIL HARDNESS |
2H |
| SPECIFIC GRAVITY |
1.28 +/- .05 |
| THEORETICAL COVERAGE |
75 sq/ft @ 2.0 mils |
| PENCIL HARDNESS |
2H minimum |
| GLOSS LEVEL (60°) |
85-95 |
| SALT SPRAY |
n/a |
| BALL IMPACT |
140 in/lb |
| SDS Sheet info # |
#6B – Polyester TGIC (Group B) |
| SDS link |
https://emeraldcoatings.com/sds-sheets/ |
| *Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish. *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings. |
Stay Organized with Our Plug Kit: 250 Plugs in 18 Styles, All in a Convenient Plastic Divider Case! Sizes Range from 0.78 mm to 36.52 mm and Withstand Up to 600°F
**Plug Count Breakdown:**
A medium priced white grease stick with good lubricating qualities. Our most popular grade for average polishing use.
A firm, hard yellow grease stick suitable for heavy-duty polishing wheel operations. A popular grade.
An excellent metal working grease stick that provides lubrication, reduces friction, tool wear and breakage, prevents burning, welding chatter, galling and tearing. It is particularly good for saw cutting applications. It is compatible with all ferrous and non-ferrous metals. Biodegradable, non-irritating and non-toxic.
Uses: Drilling, Grinding, Sawing, Tapping, Cutting, Spinning, Pipe Cutting, Machining, Lubricating Draw Dies, Pulling Wire Through Conduits, Polishing with Coated Abrasives.
Packaged in 2-1/2″ x 8″ Silver Spiral Wound Tube.
Cleverly designed to accommodate a sanding belt, the Expander Sanding Wheel allows the user to sand large areas quickly and uniformly. Ideal for sanding engine castings to remove the sand mold marks prior to polishing.
The center of this wheel has special adapters to fit shafts of ½”, 5/8”, ¾” & 1” diameter.
The wheel comes with:
- 2 x 40 Grit Belts
- 2 x 80 Grit Belts
- 2 x 120 Grit Belts
The wheel has a 6 inch diameter, with a 1.25 inch face.
Max RPM 2800
Our Aluminum Oxide sanding belts fit all other brands of expanding wheels.
We carry 40, 80, 120, 240, 320 and 400 Grit Sanding Belts.
You may wish to consider our Abrasive Belt Grease Sticks.
Grit Sizes: 40, 60, 80, 120, 240, 320, 400.
All belts except for the 60 grit are 1 1/4″ wide. The 60 grit belts are 1 1/2″ wide.
Dissolving Skulls
Black and clear Skull pattern on a 100 cm wide film. Great looking film that will turn any project into a badass piece of art
changing the base coat colour of this film will change the overall look of the part
This is a 100cm wide film, all films are sold by the Meter
Tundra Camo
Length per quantity is 5 meters long
We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products. All sale films will be sold in 5-meter rolls at a time. All sale films will be discontinued after they are sold out, once it’s gone it’s gone.
Forrest Camo
Full colour camo film
This is a 100cm wide film, all films are sold by the Meter
Steam Punk Clocks
Great looking full colour steam punk film.
This is a 100cm wide film, all films are sold by the Meter
Length sold by the Meter
High Times
This is a 100cm wide film, all films are sold by the Meter
My Account
