These new buffs are specially treated to give longer life than standard buffs. They cut and color faster and are vented to keep the work piece cooler. Hard center allows fast mounting to tapered spindle for quick change. Use with any compound.
1/8″ thick treated, razor buffs are perfect for getting into tight work areas and between fins on cylinder heads. The treated material is tough, long lasting and flexible. Use with a cutting compound. Buffs feature leather reinforced centers, with half inch holes
Mount onto a tapered spindle.
Strands of nylon impregnated with a tough aluminum oxide abrasive. Removes old paint, rust, weld scale and burns. Cleans
and polishes. Is ideal for wood because it cleans without gouging. It never loses its abrasive power, or its shape. Safe on
skin! Max 2500 rpm
The next best thing to a sand blaster
Lasts up to 10 times the life of a wire wheel, Will not puncture skin, Does not shed bristles – unlike dangerous wire wheels, Will not rust and maintains its shape
Ideal for:
-Scratch brushing aluminum and other metals for decorative finishes
-Removes paint, corrosion, weld scale, rust & weld marks from steel
-Gently removes paint and varnish from wood
-Sands wooden moldings, railings, turnings and banisters
-Removes cement from tiles, stone and brick mortar
-Prepares fiberglass, rubber, and all plastics for adhesive application
-Frosts glass
This wheel has a 1″ hole
Scrubber wheels remove rust, scratches, minor blemishes, old paint, and plating. A featherlite touch is required with these wheels, unlike an ordinary buffing wheel. Heavy pressure will result in premature wear of the wheel.
The blisters found in chrome, particularly on pot metal, can be flattened with this wheel. Substrates take a flat satin finish, which should be buffed with emery and a sisal wheel, followed by white or brown compound on a cotton wheel. This wheel has a 3/4″ hole
The folded pleats hold more compound and
keep the part cooler, resulting in a being twice
as fast as a Spiral Sewn wheel. 10” wheels require
3” washers. These wheels are softer than
their yellow cousins.
Spiral sewn wheels are the workhorse of most buffing and polishing jobs. Because the plies of cotton cloth are sewn together spirally, the
wheel becomes much harder and more pressure can be exerted on it. This is especially useful when ‘cutting’ the metal. The faces of these
wheels are pre-raked to accept compound immediately
Check out the Standard wheel and compound buffing guide for more information on Standard compounds and buffing wheels
Ideal for buffing contoured shapes, such as wheels. Mounts in most chucks. Use with any compound.
2.5″, 3.5″, or 4.5″, or Kit (all 3).
PEEK Polish sold in Canada by Emearld Coatings
PEEK® Cleans, Polishes & Protects
Aluminum, Acrylic, Arborite, Brass, Bronze, Beryllium, Chrome, Copper, Ceramic, Eisenglas, Fiberglass, Formica, Factory Gun Bluing, Gold, Glass, Linoleum, Magnesium, Marble, Nickel, Painted Surfaces, Pewter, Plastics, Perspex, Platinum, Silver, Sterling, Stainless Steel, and Tin.
PEEK® Safely Removes Acid Rain, Corrosion, Chalking, Dyes, Finger Marks, Flies, Grease, Graffiti, Heat Discoloration, Leaf Marks, Lime Deposit, Oxidation, Oil, Permanent marker, Powder Residue, Rust, Salt Water Stains, Tar, Tarnish, Tree Sap, Water Stains, and Wax Buildup. Non-Abrasive · Acid-Free · Anti-Oxidant · Safe on Skin 100% North American · Exceptional Quality
Tips:
Length per quantity is 5 meters long
We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products. All sale films will be sold in 5-meter rolls at a time. All sale films will be discontinued after they are sold out, once it’s gone it’s gone.
NON-FERROUS COLORING BAR COMPOUND. Sometimes referred to as White or Black Diamond Buffing Compound.
Intended for buffing non-ferrous metals where the work surface is in good condition, free of deep tool or die marks. When heavy marks are present, Tripoli Buffing Compound is generally used to first cut down the surface and then a second buffing operation is performed using a “Coloring” Compound to produce a mirror-bright finish.
An extra dry grade developed for “coloring out” operations on brass and sheet aluminum. Its light cutting action minimizes the danger of cutting too aggressively on the metal. Also recommended on recessed or indented surfaces that ordinarily would pack up with a greasier grade, giving difficult cleaning problems. Leaves a clear bright finish, free of dirt.
Grade D-38
Diamond Buffing Compound.
F515-6134
Canada
“FAST CUT” STAINLESS STEEL COMPOUND (Medium Greasy)
For Stainless or Cold Rolled Steel.
Stainless Compound is made of “alumina” and grease binders. Developed for use on stainless steel, its fast cutting and good coloring properties are also a favorite for buffing all types of steel.
To remove sanding scratches from stainless, start out using a sisal buffing wheel with the Super Sisal Compound #F515-6154. You can then work your way up to a spiral sewn cotton buff using the All Purpose Stainless Compound, F-515-6147.
For a final high luster finish, use a loose cotton buffing wheel or canton flannel buff with the F515-6113 White Lightning Rouge.
“FAST CUT” STAINLESS STEEL COMPOUND (MEDIUM GREASY)
Very similar to “Excello” but, being slightly greasier, it produces a faster cutting action. Used extensively on automatic buffing machines.
Grade #19. 2″ x 2″ x 10″ Bar.
515-6141
Canada
This is a greasy, extra fast cutting grade of Tripoli containing a high percentage of aggressive abrasives combined with Tripoli Powder, which produces a faster cutting action. Used extensively on automatic buffing machines.
Grade T-12. 2″ x 2″ x 10″ Bar.
515-6105
Canada
Product Description
Stainless Compound is made of “alumina” and grease binders. Developed for use on stainless steel, its fast cutting and good coloring properties are also a favorite for buffing all types of steel.
To remove sanding scratches from stainless, start out using a sisal buffing wheel with the Super Sisal Compound #F515-6154. You can then work your way up to a spiral sewn cotton buff using the All Purpose Stainless Compound, F-515-6147.
For a final high luster finish, use a loose cotton buffing wheel or canton flannel buff with the F515-6113 White Lightning Rouge.
“EXTRA FAST CUT” STAINLESS STEEL COMPOUND (MEDIUM DRY)
Because sharp abrasives have been blended into the formula, an extra fast cutting action is produced. Ideal for buffing out light tool marks or scratches. Its use may reduce or entirely eliminate previous finer polishing wheel operations.
For Stainless or Cold Rolled Steel. 2″ x 2″ x 10″. Grade #37
F515-6144
Canada
My Account
HF1325 INDUSTRIAL REVOLUTION
HF1324 MOLTEN LAVA