2K MATT CLEAR

Posted on April 22, 2017 by emerald

2K clear coat with very high chemical, gasoline, and weather resistance for high-quality and long-term sealing of repair paint jobs and new paint jobs on cars and motorcycles

Spray Max 2K MATT CLEAR Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, MATT CLEAR finish.
•2K clearcoat in an easy to use aerosol
•Activate, shake and spray
•Unique nozzle delivers spray gun results
•Dries to a MATT CLEAR finish
•Excellent weather and chemical resistance

2K patented aerosol allows you to paint with a two-component paint with no mixing! Spray Max’s innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun, broader spray pattern than conventional aerosols and no mess to clean up. You’ll get professional results from an aerosol. Pot life 48 hours. 2K MATT CLEAR clear can be applied over any base coat, dry time 12 hrs. Smooth flow, long-lasting high gloss. Excellent chemical, weather and fuel resistance. 11.8 oz net weight.

The 2K Aerosol can contains a smaller inner container for the catalyst which is separate from the paint outside. Therefore a storage stability and shelf life of several years is possible.

By activation of the membrane of the inner cylinder with the red botton, paint and catalyst is mixed immediately and the potlife starts. In comparison to the liquid paint, the potlife is 2 to 3 times longer, in some cases several days.

Longer storage stability and much longer potlife give dramatic advantages to the end user.
SAFTY DATA SHEET

TECH DATA SHEET

Comments Off on 2K MATT CLEAR

2K SEMI GLOSS CLEAR

Posted on April 22, 2017 by emerald

2K clear coat with very high chemical, gasoline, and weather resistance for high-quality and long-term sealing of repair paint jobs and new paint jobs on cars and motorcycles

Spray Max 2K SEMI GLOSS Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, SEMI GLOSS finish.
•2K clearcoat in an easy to use aerosol
•Activate, shake and spray
•Unique nozzle delivers spray gun results
•Dries to a SEMI GLOSS finish
•Excellent weather and chemical resistance

2K patented aerosol allows you to paint with a two-component paint with no mixing! Spray Max’s innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun, broader spray pattern than conventional aerosols and no mess to clean up. You’ll get professional results from an aerosol. Pot life 48 hours. 2K SEMI GLOSS clear can be applied over any base coat, dry time 12 hrs. Smooth flow, long-lasting high gloss. Excellent chemical, weather and fuel resistance. 11.8 oz net weight.

The 2K Aerosol can contains a smaller inner container for the catalyst which is separate from the paint outside. Therefore a storage stability and shelf life of several years is possible.

By activation of the membrane of the inner cylinder with the red botton, paint and catalyst is mixed immediately and the potlife starts. In comparison to the liquid paint, the potlife is 2 to 3 times longer, in some cases several days.

Longer storage stability and much longer potlife give dramatic advantages to the end user.
SAFTY DATA SHEET

TECH DATA SHEET

Comments Off on 2K SEMI GLOSS CLEAR

BRIGHT SILVER HD WEAVE

Posted on April 19, 2017 by emerald

BRIGHT SILVER HD WEAVE

Comments Off on BRIGHT SILVER HD WEAVE

High Temp Lab Metal 14 oz & 1 Pint Solvent (LQ#40)

Posted on April 19, 2017 by emerald

High Temp Lab Metal 14 oz & 1 Pint Solvent

High Temp Lab Metal

Permanent repair compound – withstands 1000ºF. Hi-Temp Lab-metal is ready-to-use right from the can. Developed for difficult repairs subject to excessive heat, Hi-Temp Lab-metal withstands temperatures as high as 1000ºF

Lab-metal may be thinned to paint consistency with Lab-Solvent, and brushed or sprayed on practically any surface to provide a rustproof, water-resistant, hard metal finish. Use the Lab-Solvent to thin Lab-Metal, clean the application surface and create a glass-smooth surface to minimize sanding. (Add Lab-solvent to extend storage-time). Store in cool place.

Easy to Use
Hi-Temp Lab-metal is applied directly from the can with a putty knife or similar tool. No two-component mixing or measuring is necessary. Many applications may be made from a single can. After each use, to prevent Hi-Temp Lab-metal from hardening in the can, pour Lab-solvent over the remaining Hi-Temp Lab-metal contents, then cover tightly. (Stir the solvent into the Hi-Temp Lab-metal before using again). Lab-solvent is also used to thin Hi-Temp Lab-metal for brush-on applications.  Hi-Temp Labmetal must be heat hardened by exposing it to a temperature of 425ºF for one hour.

Application

Hi-Temp Lab-metal may be applied with a putty knife, spatula, trowel, caulking gun, or rubber squeegee. When filling deep holes or cavities, the putty should be applied in thin layers, less than 1/4″ thick. Allow each layer to dry for at least 24 hours. Dry time may be accelerated with force curing, infrared lamps.This depends on air temp, type of metal.

To apply Hi-Temp Lab-metal with a paint brush, it must be thinned to paint consistency with Lab-solvent, then applied with light brush strokes; not worked over as with paint. Dipping the brush into Lab-solvent periodically will keep the bristles free and prevent clogging.

Depth of application determines drying time; hardening occurs as the diluent evaporates. The application must air dry for at least 24 hours, or until the product has hardened to a metal state.

In order for Hi-Temp Lab-metal to completely harden after a 24 hour air dry time, it must be exposed to a minimum temperature of 425ºF for a period of at least one hour depending on thickness of application. (The curing process may be achieved by a more gradual “heat-up”, as in the repair of an industrial oven or exhaust. In this case, as the oven is heating, the Hi-Temp Lab-metal repair is curing.)

Hi-Temp Lab-metal is recommended where original Lab-metal may not withstand the extreme heat. Originally developed due to requests from the foundry industry, industries such as metalworking, powder coating, welding, fabricating, heating, construction, auto repair, die casting, mold refinishing, and sheet metal production and finishing have found uses for Hi-Temp Lab-metal. It successfully repairs:

Durability
Hi-Temp Lab-metal adheres to most metals. Once hardened, it can be machined, ground, filed, and sanded. Buffed to a satin smooth finish, Hi-Temp Lab-metal leaves an undetectable repair. Hi-Temp Lab-metal is impervious to the attack of rust, rot, and mildew. It is not affected by varying climatic conditions, and the hardened metal can be painted over — even powder-coated.

Durability
Hi-Temp Lab-metal adheres to most metals. Once hardened, it can be machined, ground, filed, and sanded. Buffed to a satin smooth finish, Hi-Temp Lab-metal leaves an undetectable repair. Hi-Temp Lab-metal is impervious to the attack of rust, rot, and mildew. It is not affected by varying climatic conditions, and the hardened metal can be painted over — even powder-coated.

VIEW THE DOWNLOADABLE SHEETS FOR MORE INFO


tech sheetsMSDS
MORE INFOproduct info
FAQ

 

 

 

 

 

 

 

 

Technical Data

Color: Metal gray.
Adhesion: Excellent adhesion to clean, dry surfaces of most metals. Hardens upon exposure to air. Hi-Temp Lab-metal will not bond two parts together; requires air to dry. Heat cure according to the directions on the can.
Weight: One cubic inch: 28.9 grams or 1.02 oz.
Heat resistance: When heat cured, withstands temperatures as high as 1000ºF.
Chemical resistance: Not affected by mild acids; gasoline; petroleum; petroleum solvents; oil, or L.P. gas.
Combustibility: Dry and hard material will not support combustion.
Conductivity: A non-conductor.
Thermal conductivity: Est. 1-2 BTU / sq. ft. / hour / ºF
Drying time: Dependent upon thickness of application. Allow to harden for at least 24 hrs., then heat harden at 425ºF for 1 hr.
Shelf life: One year in factory-sealed can. (Add Lab-solvent to extend storage-time). Store in cool place.
Comments Off on High Temp Lab Metal 14 oz & 1 Pint Solvent (LQ#40)

OUTLAW GHOST RIDER

Posted on April 7, 2017 by emerald
    • OUTLAW GHOST RIDER

 

    This is a black and clear film on 100cm wide

Comments Off on OUTLAW GHOST RIDER

METALLIC ROSE GOLD

Posted on April 2, 2017 by emerald

ABOUT ONE HIT WONDER

One Hit Wonder Paint is a ready-to-spray basecoat formulated specifically for the hydrographic process. One Hit Wonder’s unique formula eliminates the need to add reducers, apply separate primers or adhesion promoters. You simply degrease, then scuff, apply One Hit Wonder and dip.

FEATURES

Ready-to-Spray
Will Not Rust Metal
Will Not Freeze in Cold Weather
Exceptional Coverage
18 Month Dip Window
Chemically Bonds with Film and Clear Coat
Improved Formula with Superior Activator Resistance (paint does not go soft after dipping)
Direct to Metal, Plastic*, Fiberglass, Wood, Bone, Chrome, Glass, Previously Painted Parts and More
CHOOSING A COLOR

Select your color the same way you would select a basecoat. Since water transfer film is semi-transparent, pick a paint color that compliments your film. Please note that you can mix different One Hit Wonder colors to create your own variations. We recommend keeping brites with brites. Brite Yellow and Brite Orange are best over a light base.

Intercoat Clear is a transparent One Hit Wonder basecoat.

*HDPE plastic require flame treatment before degrease and scuff.

Comments Off on METALLIC ROSE GOLD

GRAND THEFT

Posted on March 14, 2017 by emerald

GRAND THEFT

Full colour on a 100 cm wide film. Lots of different colours and action clips from your favorite video game

Comments Off on GRAND THEFT

2K GLAMOUR HI-GLOSS CLEAR

Posted on January 26, 2017 by emerald

2K clear coat with very high chemical, gasoline, and weather resistance for high-quality and long-term sealing of repair paint jobs and new paint jobs on cars and motorcycles

Spray Max 2K Glamour High Gloss Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish.
•2K clearcoat in an easy to use aerosol
•Activate, shake and spray
•Unique nozzle delivers spray gun results
•Dries to a high gloss finish
•Excellent weather and chemical resistance

2K patented aerosol allows you to paint with a two-component paint with no mixing! Spray Max’s innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun, broader spray pattern than conventional aerosols and no mess to clean up. You’ll get professional results from an aerosol. Pot life 48 hours. 2K glamor gloss clear can be applied over any base coat, dry time 12 hrs. Smooth flow, long-lasting high gloss. Excellent chemical, weather and fuel resistance. 11.8 oz net weight.

The 2K Aerosol can contains a smaller inner container for the catalyst which is separate from the paint outside. Therefore a storage stability and shelf life of several years is possible.

By activation of the membrane of the inner cylinder with the red botton, paint and catalyst is mixed immediately and the potlife starts. In comparison to the liquid paint, the potlife is 2 to 3 times longer, in some cases several days.

Longer storage stability and much longer potlife give dramatic advantages to the end user.
SAFTY DATA SHEET

TECH DATA SHEET

Comments Off on 2K GLAMOUR HI-GLOSS CLEAR

GOLD NUGGET

Posted on January 24, 2017 by emerald

GOLD NUGGET POWDER COATING
*** THIS IS A VERY UNIQUE COLOR OF GOLD ***

PC1225 GOLD NUGGET
CHEMISTRY POLYESTER TGIC A
REGULAR CURE TEMP 400F/10 min
MIN TEMP 0
MAX TEMP 0
RECOMMENDED THICKNESS 1.5 – 3.0+ mil
PENCIL HARDNESS 2H minimum
SPECIFIC GRAVITY 1.41 +/- 0.05
THEORETICAL COVERAGE 1.41 +/- 0.05
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 40-60
SALT SPRAY 1,000 hours
BALL IMPACT 100 in/lb
SDS Sheet info # #6A – Polyester TGIC (Group A)
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.

 

Comments Off on GOLD NUGGET

KTM Orange (NEW TGIC FREE VERSION)

Posted on January 17, 2017 by emerald

KTM Orange

MC1120 SAFETY ORANGE  (NEW TGIC FREE VERSION, do not mix with old version)
CHEMISTRY POLYESTER TGIC-FREE
REGULAR CURE TEMP 375F/10 min
MIN TEMP 350F/15 min
MAX TEMP NA
RECOMMENDED THICKNESS 2.0-3.0 mils
PENCIL HARDNESS 5b
SPECIFIC GRAVITY 1.41 ± 0.05
THEORETICAL COVERAGE 136 ft /lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-90+
SALT SPRAY 1,000 hours
BALL IMPACT 160 in/lb
SDS Sheet info # #4 – Polyester TGIC Free
SDS link https://emeraldcoatings.com/sds-sheets/
WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection.   When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings.

 

Comments Off on KTM Orange (NEW TGIC FREE VERSION)

Redline powder coating gun (no longer sold by emerald coatings)

Posted on January 17, 2017 by emerald

NO Longer Sold by Emerald Coatings.

Emerald coatings no longer sell’s any powder coating guns

All New High Performance RED LINE EZ50 powder coating gun Canada

– Improved electrostatic charging – the highest in this category of powder coating guns
– Consistent and smooth powder flow
– A range of nozzles and diffusers as standard equipment with every gun
And of course, the convenience of EZ sSeries powder guns …
Plug into your wall power-socket
Connect a small air compressor line
Fill powder in the cup …
… and you are ready. As simple as one, two three!
• No control panel required – high performance electro-pneumatics built into the gun itself
• No hopper required – large sized cup feeder (1 lb/0.5 kg capacity)

• No messy tubes or cables – all in-built
The EZ50 is a complete powder coating gun.
For the DIY coater – a hobby machine with unmatched results
For the professional coater – a low cost standby gun
For the entry-level coater – an ideal start-up gun
For the first-time coater – quality results at low investments
Powder charging: Controllable upto 50 kV
Powder flow: High performance ForceFeed technology for smooth uniform powder flow

30 Day Manufacturer’s Warranty Included. Spare parts and repair service available upon request.

man smallbro smallsmall tips

 

Redline powder coating guns sold in Canada by Emerald Coatings

Comments Off on Redline powder coating gun (no longer sold by emerald coatings)

Treated Spiral Sewn Buffing Wheel

Posted on January 1, 2017 by emerald

Cut and colour faster than with regular buffs. Lasts longer than regular buffs.

These new buffs are specially treated to give longer life than standard buffs. This treatment makes them much harder than regular cotton buffs, which allows the user to exert more pressure onto the wheel and gets the job done faster. Use with any compound

Comments Off on Treated Spiral Sewn Buffing Wheel

Denim Buffing Wheel

Posted on December 30, 2016 by emerald

Our newest buffing wheel, the denim buffing wheel, is soft enough for any buffing application that calls for cotton wheels, but, because of the sturdy denim construction, it lasts much, much longer than a cotton buff.

The faces of these wheels are pre-raked to accept compound immediately.

Use With Any Compound to cut or colour your metal.

Comments Off on Denim Buffing Wheel

Domet Flannel Wheel

Posted on December 30, 2016 by emerald

Domet flannel is very the softest available material, and this wheel is loosely stitched, so the layers of cloth flare out to give a wide angle ultra smooth polishing surface.

Generally used with the BLUE or RED compound, this wheel can be used on the most delicate items such as silver and gold plate.

This wheel should not be contaminated with any other compound.

Comments Off on Domet Flannel Wheel

Canton Flannel Wheel

Posted on December 30, 2016 by emerald

Use in the final stage of buffing to colour very thin plated surfaces.

Canton Flannel is very soft, and this wheel is loosely stitched, so the layers of cloth flare out to give a wide angle ultra smooth polishing surface.

Generally used with the BLUE or RED compound, this wheel can be used on the most delicate items such as silver and gold plate.

This wheel should not be contaminated with any other compound.

Check out the Standard wheel and compound buffing guide for more information on Standard compounds and buffing wheels

Comments Off on Canton Flannel Wheel

Loose Cotton Wheel

Posted on December 30, 2016 by emerald

Gets into cracks and crevices better than Spiral Sewn Cotton Wheels.
The main purpose of a loose cotton wheel is to polish and cut in a similar manner to the Spiral sewn wheel, except that this wheel, not being tightly stitched together, will ‘mush’ or collapse, allowing the cotton to get into awkward places more easily. If you have an object with fine details and awkward crevices, then this is the wheel to use.
Because you will be unable to exert pressure which slows down other harder wheels, you should consider putting LARGER loose cotton wheels on your buffer. This will increase the surface speed, improving the overall finish and the time involved.

Check out the Standard wheel and compound buffing guide for more information on Standard compounds and buffing wheels

For example, on a 1/4hp motor, @ 3450rpm, you can safely put up an 8″ wheel x 1/4″ thick. On a 1/3rd hp motor, 10″ x 1/2″ thick, on 1/2hp motor 8″ x 1″ thick.

3/4 hp motor can carry several 12″ wheels.

Use with any compound.

Comments Off on Loose Cotton Wheel