My Account
$17.10
Discount Pricing
Description
OUTGAS FORGIVING ZINC FREE LIGHT GREY PRIMER THAT LAYS DOWN NICE AND SMOOTH.
EPOXY/POLYESTER HYBRID ZINC-FREE OUT-GASSING FORGIVING PRIMER
| PC4000 | OGF Light Grey Primer | |||
| CHEMISTRY | Epoxy | |||
| REGULAR CURE TEMP | 375F 6-12 MIN | |||
| MIN TEMP | 338F 9-17 MIN | |||
| MAX TEMP | 400F 5-10 MIN | |||
| RECOMMENDED THICKNESS | 2.5 | |||
| PENCIL HARDNESS | NA | |||
| SPECIFIC GRAVITY | 1.6 g/cm3 | |||
| THEORETICAL COVERAGE | 51.5 ft2 /lb at 2.5 mils | |||
| PENCIL HARDNESS | 2H minimum | |||
| GLOSS LEVEL (60°) | NA | |||
| SALT SPRAY | 1,000 hours | |||
| BALL IMPACT | NA | |||
| SDS Sheet info # | #11 – Epoxy/polyester Hybrid | |||
| SDS link | https://emeraldcoatings.com/sds-sheets/ | |||
| OUTGAS FORGIVING ZINC FREE LIGHT GREY PRIMER EPOXY/POLYESTER HYBRID ZINC-FREE OUT-GASSING FORGIVING PRIMER. *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings. |
||||
Additional information
| Weight | 1.10 lbs |
|---|---|
| Dimensions | 2.37 × 2.37 × 2.37 in |
