InstaCrete Epoxy 4 oz

Description

InstaCrete Epoxy Putty Stick is a hand-kneadable, fast-setting polymer compound for permanent repairs to concrete and masonry. It also bonds to metals, wood, glass and many plastics. It comes in a handy “Tootsie-roll®” form with the curing agent encapsulated in the contrasting color base material.

Product Description
InstaCrete is a hand-mixable, fast-setting epoxy putty that quickly repairs
concrete and masonry. It also bonds to metals, wood, glass, and many
plastics. After mixing, it forms a concrete repair polymer that cures to a
concrete-like color and texture. Each handy stick contains pre-measured
portions of activator and base throughout — no measuring or mixing tools
are necessary. The consistency (like modeling clay) eliminates drips and
runs, facilitates adhesion to the substrate, and allows the material to be
shaped and formed as needed before curing begins. After 60 minutes the
application can be drilled, sawed, filed, tapped, and painted. Suitable for
interior or exterior use, it is resistant to water, chemicals, and temperature
extremes. InstaCrete contains no solvents or VOCs. It’s non-flammable and
releases no noxious fumes. It won’t shrink or pull away. The unused
portion stays fresh for future use when saved in its original package.
Performance Data*
SHELF LIFE AT 75°F (24°C) 24 months minimum
SHORE D HARDNESS AT FULL CURE (24 hrs) 80
LAP SHEAR TENSILE STRENGTH
On steel (1″ x 1″ x 1/16″) 700 lbs (4.8 MPa)
On concrete Concrete failure
COMPRESSIVE STRENGTH 8,000 psi (55 MPa)
SHRINKAGE <1% NON-VOLATILE CONTENT 100% DIELECTRIC STRENGTH 300 volts/mil TEMPERATURE LIMITS Continuous -40° to 250°F (-40° to 121°C) Intermittent -40° to 300°F (-40° to 149°C) CHEMICAL RESISTANCE Resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions and dilute acids and bases. NOT INTENDED FOR STRUCTURAL APPLICATIONS InstaCrete Canada your Canadian distrubitor