This handy accessory turns an ordinary motor into a bench mounted drill. Just attach this adapter to any 1/2″ right threaded shaft or one of our shaft extenders. The Chuck Adapter is seen here fitted to a shaft extender.
1/4″ or 1/2″ throat
This handy accessory turns an ordinary motor into a bench mounted drill. Just attach this adapter to any 1/2″ right threaded shaft or one of our shaft extenders. The Chuck Adapter is seen here fitted to a shaft extender.
1/4″ or 1/2″ throat
Attach these mandrels to an electric motor with a V Belt to make a HIGH QUALITY, low cost work station for various sanding, polishing and buffing operations. Will run wheels up to 1″ thick.
Features high quality precision grade die cast ball bearing pillow blocks, permanently sealed and lubricated. Threaded shaft ends L/H & R/H
2″ diam V pulley (for 1/2 belts) & hex nuts with flanged washers for shaft ends.
Attach these mandrels to an electric motor with a V Belt to make a HIGH QUALITY, low cost work station for various sanding, polishing and buffing operations. Will run wheels up to 1″ thick.
Features high quality precision grade die cast ball bearing pillow blocks, permanently sealed and lubricated. Threaded shaft ends L/H & R/H
2″ diam V pulley (for 1/2 belts) & hex nuts with flanged washers for shaft ends.
These sturdy adapters are great for mounting wire wheel brushes, grinding wheels, cut off wheels, buffs etc onto any chuck power tool. 1/4″ or 1/2″ threaded end.
| RAL7040 | RAL 7040 WINDOW GREY | |||
| CHEMISTRY | SD POLYESTER TGIC | |||
| REGULAR CURE SCHEDULE | 375F/10 MIN | |||
| MIN RANGE | 350F/15 MIN | |||
| MAX RANGE | 400F/7 MIN | |||
| RECOMMENDED THICKNESS | 2.0 TO 3.0 MILS | |||
| PENCIL HARDNESS | 2H | |||
| SPECIFIC GRAVITY | 1.56 +/- .05 | |||
| THEORETICAL COVERAGE | 62 sq/ft @ 2.0 mils | |||
| PENCIL HARDNESS | 2H minimum | |||
| GLOSS LEVEL (60°) | 80-95+ | |||
| SALT SPRAY | 1,000 hours | |||
| BALL IMPACT | 140in/lb | |||
| SDS Sheet info # | #6B – Polyester TGIC (Group B) | |||
| SDS link | https://emeraldcoatings.com/sds-sheets/ | |||
| WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, CLEAR COAT IS NOT NEEDED BUT WILL ADD EXTRA PROTECTION. When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings. | ||||
POR-15® Rust Preventive Coating is a high performance coating designed for application directly on rusted or seasoned metal surfaces and will stop rust permanently. POR-15® Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust. POR-15® Rust Preventive Coating is an effective anti-corrosive and rust preventive coating that offers superior chemical resistance due to its dense, cross-linked molecular composition and non-porous attributes.
The secret lies in POR-15® Rust Preventive Coating’s curing process. Most paints dry through evaporation, but POR-15® Rust Preventive Coating dries faster when moisture is present. It has the opposite chemistry of ordinary paints. Now add to that POR-15® Rust Preventive Coating incredible hardness, toughness, and flexibility and you have a coating that is practically indestructible. POR-15® Rust Preventive Coating is a permanent rust repair great for auto frame and chassis restoration, protecting valuable equipment against rust and corrosion. You’ll be amazed at the toughness!
Not UV stable, keep away from sunlight as it will fade. Use POR-15® Top Coat paints for coatings that will be out in the SUN POR-15® Top Coat paints
WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. USE PROPER PPE WHEN HANDLING
Get maximum convenience and efficiency with a POR-15® SIX PACK. This package contains six 4 oz.cans of Gloss Black POR-15®, so you’ll only open small amounts of POR-15® as you need them, with NO WASTE! Each can covers 12 square feet. Order your SIX-PACK today! Enough to cover 72 square feet.
POR-15® Rust Preventive Coating is a high performance coating designed for application directly on rusted or seasoned metal surfaces and will stop rust permanently. POR-15® Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust. POR-15® Rust Preventive Coating is an effective anti-corrosive and rust preventive coating that offers superior chemical resistance due to its dense, cross-linked molecular composition and non-porous attributes.
The secret lies in POR-15® Rust Preventive Coating’s curing process. Most paints dry through evaporation, but POR-15® Rust Preventive Coating dries faster when moisture is present. It has the opposite chemistry of ordinary paints. Now add to that POR-15® Rust Preventive Coating incredible hardness, toughness, and flexibility and you have a coating that is practically indestructible. POR-15® Rust Preventive Coating is a permanent rust repair great for auto frame and chassis restoration, protecting valuable equipment against rust and corrosion. You’ll be amazed at the toughness!
Comes in Gloss black, Semi gloss black, Silver, Grey and Clear
Not UV stable, keep away from sunlight as it will fade. Use POR-15® Top Coat paints for coatings that will be out in the SUN POR-15® Top Coat paints
WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM. USE PROPER PPE WHEN HANDLING
For years our customers have asked us for a thicker version of our world-famous POR-15 ® for filling seams or holes. Here it is! POR Patch™ is, quite literally, POR-15 ® in a tube, and like POR-15 ® it dries as hard as a rock, remains flexible, and once dry is totally impervious to fuels and solvents. It’s so tough it actually adds strength to weakened metal. And it won’t absorb moisture and swell like conventional body fillers. Try it yourself, it’s incredible!
4oz tube
Available in White or Black.
Now you can prime and paint right over cured POR-15® Rust Preventive Coating with our POR-15® High Build Primer. We developed this special “interlocking” primer after many requests from customers who wanted a coating with special adhesion characteristics that make it perfect for most painted surfaces, especially POR-15® Rust Preventive Coating.
POR-15® High Build Primer is highly resistant to penetrating topcoats, like lacquers, enamels, and two-component finishes. It sands very smoothly, as well. Try some on your next project.
Formerly Tie Coat Primer
POR-15® Metal Prep provides the best adhesion for POR-15® Rust Preventive Coating on any metal surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15® Rust Preventive Coating, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe POR-15 Metal Prep to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15® Rust Preventive Coating or any other coating. POR-15® Metal Prep is not caustic, corrosive, toxic or flammable.
POR-15® Metal Prep Features:
Interesting Facts you should know about steel and prepping it before you coat it with POR-15: In every car manufacturing facility, steel in different parts of the car body often comes from different steel mills and different production lots, and the surface texture varies with the condition of the steel mill rolls which cold roll the steel to its final thickness. Also, surface cleanliness varies with the mills cleaning procedures, especially the procedures used to control carbon smut is actually baked onto the steel during the high temperature annealing process which follows rolling. This carbon smut is impossible to remove except by mechanical abrasion. Rust varies with the care taken in handling (1) at the steel mill, (2) during transportation and storage, and (3) during fabrication. Steel stored for a long time with rust inhibiting oil will react to form an incomplete oxide known as oil stain. The result of all this is that ordinary steel varies widely in the manner in which it accepts coatings. Although some commercial steel provides an excellent surface for coatings, you are just as likely to find steel which gives poor adhesion and poor rust resistance, even with good coatings. Often the same mill will produce both very good and very poor surface quality, depending upon a number of uncontrolled factors. Nearly all the above problems can be overcome by using POR-15® Metal Prep before you coat your steel. POR-15® Metal Prep is an inexpensive insurance policy that guarantees perfect adhesion of POR-15® Rust Preventive Coating to any metallic surface every time. Whether you paint your car or your fence or your outdoor furniture, the problems are always the same, because you dont know anything about the steel youre painting or what mill it came from, and you cant learn anything by just looking at it even if you have perfect vision!
POR-15® Cleaner Degreaser cleans and degreases in one application without leaving residues, noxious fumes or flammable solvents. No other cleaner works as fast or as well. It makes petroleum-based cleaners almost obsolete because POR-15® Cleaner Degreaser can be diluted with water up to 3, 4, 5 and even 10 times its volume while remaining more potent than other cleaners. POR-15® Cleaner Degreaser removes grease, oil, mildew, algae, musty odors, soap films, wax. Use it to clean canvas, vinyl, nylon, holding tanks, grease traps, auto parts and more. Adhesion is important with most paints but has to be perfect for POR-15 to achieve its maximum effectiveness. A solvent wipe before painting didn’t work with POR-15; in the lab we found it did more harm than good by leaving a residue that didn’t help with adhesion or appearance. We had to come up with a substance that would clean metal without leaving a residue. What we developed, POR-15® Cleaner Degreaser, contradicts all accepted theories about metal prep products: its water-based, not solvent-based and it cleans without leaving residues. In laboratory adhesion tests, our POR-15® Rust Preventive coating using POR-15® Cleaner Degreaser first to clean the bare metal far exceeded every other prep product we found in the marketplace.
Formerly MARINE-CLEAN
Designed exclusively for use with our great GLISTEN PCTM clear coat, AP-120 prep guarantees perfect adhesion of GLISTEN PCTM to any metal surface, especially chrome or polished aluminum, where good adhesion is often difficult to achieve. AP-120 is non-flammable with no noxious fumes. Wear rubber or latex gloves when using.
POR-15® High Temp Paint
Guaranteed to maintain rich, brilliant colors without burning off or discoloring.
POR-15® High Temp Paint is capable of withstanding extreme temperatures up to 1200°F and will resist cracking, chipping, and peeling. It is also extremely weather, salt and moisture resistant. We guarantee this to be the most uniform heat-resistant coating available anywhere. Sandblasting is the optimum surface preparation. Can be used on all cars, domestic or foreign. Meets or exceeds properties and requirements of MIL-C-13370.
Formerly POR-20, Black Velvet and Factory Manifold Gray
SDS FLAT BLACK SDS FLAT BLACK AEROSOL
SDS ALUMINUM SDS ALUMINUM AEROSOL
SDS MANIFOLD GREY SDS MANIFOLD GREY AEROSOL
Buy this terrific kit and your shopping is done! It has everything you need to do a superior job, and includes the step-by-step instructions needed to make sure you do it right, especially if you’re a beginner.
First, our special Stripper/Solvent engine cleaner gets rid of all dirt, grease and oil. Next, use our METAL-READY™ to dissolve rust and prep the metal. Now prime and rust-proof your engine with regular POR-15 ®.
And lastly, topcoat with the extra-pigment Engine Enamel color of your choice, all in one convenient kit. You won’t believe the job you’ve done… PERMANENTLY!
Kit Contains:
POR-15 Solvent
Metal-Ready
POR-15 (Black)
Engine Enamel (colour of your choice)
Paint Brushes
Safety Face Mask
Latex Surgical Gloves
Colours on screen are NOT necessarily accurate… Display colours may vary from one monitor to another.
Colours are shown for your general reference, not as exact colour-matches.
2K Urethane paints are tough, glossy, two-component coatings for use over primed or painted surfaces.
They are moisture cured, so exposure to moisture and humidity will actually improve their performance and strength.
When fully cured, 2K Urethane Paints are a rock-hard, chemical resistant, non-porous, and incredibly tough coating. Durable and easily cleaned, they will not crack, chip, peel, or fade with age. 2K Urethane Paints will withstand even the most intensive UV environments.
These beautiful, two-component coatings are stronger than any color paint you have ever tried. The long-lasting brilliant colors will look terrific wherever you use them, and will withstand incredible abuse. You’ll be amazed and delighted at how well 2K Urethane paints hold up under conditions that would quickly destroy ordinary finishes.
2K Urethane paints are also excellent for industrial applications. Use our safety yellow or orange colors on machinery guards or heavy equipment, and then stand back and marvel at how long they last under abuse.
Put 2K Urethane Paints on the chassis of your car, truck, or motorcycle, and quit worrying about stone chips and gravel roads. You’ll be amazed at the toughness!
My Account