Blue Begone™; Liquid Chrome Polish

Posted on February 26, 2016 by emerald
  • Remove bluing on chrome caused by high heat.
  • Removes bluing and stains on copper, brass and stainless.
  • Removes burnt on shoe sole and rain coat rubber.

 

Blue Begone™ is specially formulated combining fine alumina powder, blended with green chromium oxide for producing a bright lustrous shine on stainless steel, aluminum, chrome, brass and more. It removes ‘bluing’ in seconds, while bringing chrome to a mirror shine. You can use BLUE BEGONE™ on ALL your chrome work.

  • Shine & Polish Aluminum, Chrome, Stainless To A Mirror Finish
  • Fast & Easy
  • Removes Oxidation
  • Restores A Bright, Shiny Luster
  • Contains No Petroleum Distillates, Non-Toxic & Bio Degradable

BLUE BEGONE™ is also ideal for slower rotating buffing wheels such as 4″ wheels mounted on an arbor adapter.

Using the applicator nozzle, simply apply a small amount of compound to the buff, and lightly work it into and around the buff with your finger.

Place the buffer groove over the pipe and start buffing, using gentle pressure. Re-apply more BLUE BEGONE™ as needed.

Finally, using a wettened SHAMMY cloth, clean off any dried material.

1 x 8 oz bottle

Comments Off on Blue Begone™; Liquid Chrome Polish

Kozak Drywash Cloth

Posted on February 26, 2016 by emerald

Since 1926, KozaK® has been the leader in producing heavy-duty dusting and polishing cloths. Each cloth has extra-deep nap, and is made from 100% USA cotton fibers. Our manufacturing process assures you a safe and effective way to eliminate about 80% of wet-washing. Typical use of over 50 cleanings per cloth

 

4.5 sq ft

Comments Off on Kozak Drywash Cloth

Haze Remover-8oz.

Posted on February 26, 2016 by emerald

Specially formulated powder removes light compound residue and haze, allowing for close inspection of the polished part. Helps remove those annoying micro-fine scratches.

Sprinkle on the part and wipe off with a soft cloth.

8 fl.oz.

Comments Off on Haze Remover-8oz.

Cerium Oxide Refill

Posted on February 26, 2016 by emerald

8 oz.

Comments Off on Cerium Oxide Refill

Flitz Metal Polish, Fiberglass & Paint Restorer

Posted on February 26, 2016 by emerald

FLITZ POLISH – PASTE

One product, many uses. Metal, plastic, fiberglass, glass, Corian®…
This is our signature product. The one that launched our company over 30 years ago. A concentrated cream, Flitz Polish is unsurpassed in its ability to Clean, Polish, Deoxidize and Protect. Tough,durable protection; Non-abrasive formula; Non-toxic; Non-flammable;USDA authorized; Protects up to 6 months in fresh water; up to 3 monthsin salt water.

Easily Removes:
Tarnish, Rust, Water Stains, Chalking, Lime Deposits, Heat Discoloration, Lead & Powder Residue, Oxidation, Bugs, Tar, Oil, Fingerprints, Tree Sap, Bird Droppings, Graffiti, Dyes, Black Streaks/Scuff Marks.

Use on:
Brass, Copper, Silverplate, Sterling Silver, Chrome, Stainless Steel, Nickel, Bronze, Solid Gold, Aluminum, Annodized Aluminum, Beryllium, Magnesium, Platinum, Pewter, Factory Hot Gun Bluing, Painted Surfaces, Formica®, Cultured Marble, Corian®, Glass, Plexiglas®, Plastics, Fiberglass, Eisenglass, and Armatel®
Not for: Electroplated finishes.

HOW TO USE:
Use sparingly. Do not let dry. Buff with Flitz Microfiber, Flitz Original Büff Ball or dry towel while Flitz is still moist.
Tarnished Brass, Copper, Bronze, etc: Apply Flitz with paper towel. Rub briskly, polish with soft cloth.
Tarnished Silver & Gold: Apply light coat of Flitz with soft cloth. Polish with clean dry cloth until brilliant.
Firearms: Apply light coat of Flitz with a soft cloth and polish with a clean dry cloth. Flitz will not harm factory gun bluing.
Rust & Corrosion: Apply Flitz with #0000 Steel wool. If necessary, apply pressure when rubbing. Polish with soft cloth.
Marine Corrosion: Apply Flitz using Bronze wool applying pressure while rubbing if necessary. Polish with a soft cloth.
Aluminum, Mag Alloys, & Stainless: Apply Flitz and clean with paper towel. Polish with soft cloth.
Heat Discoloration: Apply moderate coat of Flitz. Allow to penetrate 3 minutes. Rub with paper towel. Polish with soft cloth. Repeat if necessary.
Lime Deposits: Apply Flitz with stiff brush. Rub until lime is removed. Polish with soft cloth.
Fiberglass & Painted Surfaces: Apply Flitz with damp cloth. Polish with soft, dry cloth.

Comments Off on Flitz Metal Polish, Fiberglass & Paint Restorer

Dome Felt Bob – 1w x 1h x 1/4 inch Shaft

Posted on February 25, 2016 by emerald

1″ Wide x 1″ High x 1/4″ Shaft

Up To 20,000 RPM

Comments Off on Dome Felt Bob – 1w x 1h x 1/4 inch Shaft

Cylinder Felt Bob – 1/4 inch Shaft

Posted on February 25, 2016 by emerald

Various Sizes

Up To 20,000 RPM

Comments Off on Cylinder Felt Bob – 1/4 inch Shaft

Collinite Super Doublecoat Auto Wax

Posted on February 25, 2016 by emerald

Description
A Mr. Collins original, this classic carnauba/polymer blend is also Collinite’s most durable. Holds up month after month against harmful outdoor corrosives; UV, rain, snow, salt, dust, dirt, grime, bugs, staining and more. Ideal as a winter wax when both lasting shine and all-season/all-conditions protection are equally crucial. Handcrafted and handpoured in the USA.

Directions
Surface should feel lukewarm to the touch. Apply wax in THIN, even coat to a CLEAN section no larger than 2X2 ft at a time with applicator pad. As wax begins to dry/haze, polish off with dry microfiber or soft cotton towel. See TECH SHEET for additional tips and instructions.

Applications
Car, truck, bike, RV, boat, aircraft, personal watercraft, snowmobile, ATV, tractor/farm equipment, golf cart, snowplow.
Exterior gel coat, fiberglass, clear coat, single stage and lacquer paints and highly finished wood.
-CLEAN, unblemished painted/unpainted metals; chrome, stainless steel, aluminum, copper, and brass,
-NOT recommended for rubber, non-skid, black trim, vinyl, glass or non-painted plastic.


Tech Sheet

Auto product selector guide

Comments Off on Collinite Super Doublecoat Auto Wax

Collinite Marque d’Elegance Auto Wax

Posted on February 25, 2016 by emerald

Description
We devote ridiculous amounts of #1 grade carnauba to all our pure wax formulations, but the No. 915 takes the gold cigar. With over 15% more than our No. 476s, the Marque D’ Elegance boasts Collinite’s highest amount of rare carnauba; yielding our highest gloss and warmest shine to darker, meticulously maintained finishes. Look for exceptional durability and a price that’s hundreds less than other boutique brands. Handcrafted and hand poured in limited quantities in the USA.

Directions
Surface should feel lukewarm to the touch. Apply wax in THIN, even coat to a CLEAN section no larger than 2X2 ft at a time with applicator pad. As wax begins to dry/haze, polish off with dry microfiber or soft cotton towel. See TECH SHEET for additional tips and instructions.

Applications
-Exterior vehicle surfaces-car, truck, RV, aircraft, motorcycle, snowmobile, boat.
-Clear-coat, single stage and lacquer paints, gel coat, and fiberglass.
-CLEAN, unblemished painted/unpainted metals; chrome, stainless steel, aluminum, copper, and brass
-NOT recommended for rubber, black trim, vinyl, glass or non-painted plastic.


Tech Sheet

Auto product selector guide

Comments Off on Collinite Marque d’Elegance Auto Wax

No. 325 All In One Cleaner-Wax

Posted on February 25, 2016 by emerald

Renews neglected paint & provides a high gloss shine with lasting paint protection

  • Micro abrasives gently remove minor swirls, light water spots & other mild contaminants
  • Clear coat safe. For hand or machine use
  • Provides high level of gloss and durable water beading

Description
All in one cleaner-polish-protectant renews neglected paint and provides high gloss shine while protecting against future weathering. Micro abrasives gently restore clarity by removing brake dust, light water spots, minor swirls & other mild contaminants that washing will not eliminate from finish, while carnauba-polymer wax blend enhances gloss and brightens dulling surfaces-leaving behind a level of durable paint protection not commonly found in single step products. For clear coat & single stage exterior automotive paint. Not for use on non-painted plastic trim, vinyl, rubber or glass. Handcrafted and hand-poured in the USA.

Directions

Place finger over cap and shake well before using. Surface should be pre-cleaned (washed), dry and feel lukewarm to the touch. BY HAND: Apply small amount of No.325 to microfiber applicator pad and spread evenly across 2×2 ft section at a time. Rub as necessary to loosen surface contaminants/light oxidation. As product begins to dry, polish off with dry microfiber towel. Reapply as necessary for stubborn contamination.  BY DA MACHINE: Apply 5-6 pea size drops to foam polishing pad. Set machine speed between 4800-5800 OPM. *Place pad directly on paint before turning machine on to avoid product sling. Working within 2×2 section at a time, spread product evenly within section before turning machine on. Once spread, turn machine on and apply moderate pressure on machine. In an overlapping/cross-hatching pattern work for 4-5 passes within section. Before product completely dries, remove with dry microfiber towel.

To obtain added protective durability on clean surface, follow up with one of Collinite’s last step waxes (No. 845, 476 or 915).

Applications

-For clear coat & single stage exterior automotive paint

-Not for use on non-painted plastic trim, vinyl, rubber or glass

 

Comments Off on No. 325 All In One Cleaner-Wax

No. 855 Leather and Vinyl Wax

Posted on February 25, 2016 by emerald

Description
Far from your typical wipe on, wipe off leather dressing, No. 855 deep feeds leather and vinyl to create and preserve that like-new, matte finish. Provides rich carnauba gloss while providing a protective coating of weather protection to guard against future wear, deterioration, drying/cracking, and spills. Handcrafted and hand-poured in the USA.

Directions
Shake well before using. Surface should feel lukewarm to the touch. Apply THIN and even amount of No. 855 to section no larger than 2X2 ft at a time with applicator pad. Rub well to loosen any film etc to ensure even coverage. Before product dries, polish off with dry microfiber or soft cotton towel. A well ventilated area is preferable for interior application. See TECH SHEET for additional tips and instructions.

Applications
-For automotive, marine, RV and aircraft; seating, upholstery
-NOT recommended for suede, fabric, buck, unsealed leather or exterior vinyl trim
-Also works well on saddles, furniture, select sporting equipment


Tech Sheet

Marine Product Selector Guide

Comments Off on No. 855 Leather and Vinyl Wax

COLLINITE HEAVY DUTY LIQUID FLEETWAX

Posted on February 25, 2016 by emerald

Description
For the detailer in search of less frequent wax applications, the No. 885 provides the ultimate in Collinite staying power. Provides a shine that’s unmistakably carnauba with durability that rivals even that of leading sealants. Long-lasting protection guards against UV, salt spray, marine growth, stains etc. High luster finish reduces drag by increasing surface sleekness; saving on fuel costs and helping achieve higher speeds on sailboats. Handcrafted and poured in the USA. *Editor’s Choice Practical Sailor July 2009, Top Paste Wax Powerboat Reports October 2004, Top Performer Powerboat Reports 1994.

Directions
Apply THIN coat of wax with applicator pad to CLEAN section no larger than 2X2 ft at a time. When wax begins to dry (light, hazy residue will appear on surface), remove with dry microfiber towel or cotton cloth. If surface is soiled with stains/dirt/oxidation, first use Collinite’s No. 920 Fiberglass Boat Cleaner. See TECH SHEET for additional application tips and instructions.

Applications
-Boat/personal watercraft, RV, aircraft; topsides, hull, rails etc.
-CLEAN, contaminant-free surfaces only
-Exterior gel coat, fiberglass, clear coat, and highly finished wood
-Painted plastic and both painted/unpainted metals; chrome, stainless steel, aluminum, copper, and brass
-NOT recommended for rubber, non-skid, black trim, vinyl, glass or non-painted plastic


Tech Sheet/a>

Marine Product Selector Guide

Comments Off on COLLINITE HEAVY DUTY LIQUID FLEETWAX

Extra Long Shaft Extender

Posted on February 25, 2016 by emerald
Designed especially for larger buffing & polishing units. The wide shoulder provides plenty of clearance plus ample space for easy movement & positioning of work pieces. Great for mounting larger sized wheels. 6-1/2″ Long.  All shaft extenders have a 1/2″ threaded end for 1/2″ Wheel Hole.
Comments Off on Extra Long Shaft Extender

AIR CURE CERAKOTE GLACIER GOLD 1800F

Posted on February 25, 2016 by emerald

AIR CURE CERAKOTE GLACIER GOLD 1800F
Cure Schedule (Ambient Temperature): Dry to touch at 4 hours Ready for use at 12 hours Full cure at 72 hours

Unsurpassed. No other word can adequetely describe Cerakote C-7800 Glacier Gold coating. Formulated to withstand temperatures of over 1,200 degrees Fahrenheit and thermal shock from those temperatures directly into water with no adverse effects, C-7800 retains its rich gold finish in the most extreme environments. C-Series coatings are a line of air cured, ready to spray ceramic coatings. Appearance * Ultra smooth * Rich Gold finish Application * Easy to apply, Single coat, Air cure formula * 85% solids yields higher coverage than any other high temp coating * Self-leveling properties Other * VOC Exempt in all 50 states Performance *Better thermal barrier properties than any other high temperature coating * Industry leading heated and un-heated corrosion resistance * No discoloration, even past 2000

*** SHAKE WELL BEFORE USE ***
***PLEASE STORE IN ROOM TEMP AND VENTILATE CONTAINER WEEKLY***
TECH SHEET SPRAY GUNmsdsMORE INFO MANUAL

Glacier 3Glacier 11

 

Comments Off on AIR CURE CERAKOTE GLACIER GOLD 1800F

RAL 8016

Posted on February 25, 2016 by emerald
RAL8016 RAL 8016 MAHOGANY BROWN
CHEMISTRY SD POLYESTER TGIC
REGULAR CURE SCHEDULE 375F/10 MIN
MIN RANGE 350F/15 MIN
MAX RANGE 400F/7 MIN
RECOMMENDED THICKNESS 2.0 TO 3.0 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.50 +/- .05
THEORETICAL COVERAGE 64 sq/ft @ 2 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 120 in/lb
WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, CLEAR COAT IS NOT NEEDED BUT WILL ADD EXTRA PROTECTION.   When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings.
Comments Off on RAL 8016

QUICK CONNECT AUTOMATIC SPRAY GUN

Posted on February 21, 2016 by emerald

AJ-P08F Meiji Automatic spray gun

Adoption of new type of nozzle and cap 

With taper structure of the nozzle tip, AJ-P enables high atomization and low spattering,　with a small spraying volume, resulting in maintenance and improvement of economical　effect, environmental conservation and continuous painting performance.

Remote operation

Atomization air and pattern air are supplied via separate circuits.  This structure enables remote operation of individual circuits.

Light-weight and compact

Even when the joint box (including the joint) is attached,the body is light-weight and　　compact. This structure enables transportable load reduction, quick operations,　　flexible access and short-distance spraying, and results in an enlarged teaching range.

  Maintenance efficiency improvement and attaching/detaching time reduction

　　The gun body and the joint box can be attached and detached with a single bolt, 　　and the joint and hose need not be removed from the gun body, thus enabling easy 　　positioning when the joint box is re-mounted after maintenance. No special tools required.

　　HIGH TRANSFER EFFICIENCY FOR FLAT SURFACE FINISH

　　We add new air cap F (for flat surface finish at high transfer efficiency) on our joint　type automatic spray gun line-up.  In use of conventional pressure feed automatic spray gun at low spraying volume,  over spraying and irregular surface have been problems to be solved.  Air cap, F-type is newly designed to lessen these problems with innovative technology especially for use at low spraying pressure.  It, at the same time, maintains high performance in atomization, transfer efficiency  and flat surface finish.  These features are suitable for smaller workpiece and spindle spray coating.  Air horn hole releases pattern air at the position closer to paint outlet and atomizing  air hole with low angle in order to reduce paint adhesion on the surface of air cap.

Emerald Coatings is your Canadian dealer for Meiji spray guns focusing on robotic and automation spray guns in Canada

AJ-PF_E01 AJ-PF_E02 (1) AJ-PF_E02 AJ-PF_E03

Comments Off on QUICK CONNECT AUTOMATIC SPRAY GUN