Common black colour swatch set

Posted on August 9, 2017 by emerald

This is a swatch set of all the popular black colours that we sell.
In this set, you will get a 1.5″ x 3″ sprayed panel of the following colours on a key ring
1 X Black matte tuscan
1 x Black Carbide
1 x Deep black texture
1 x Phantom flat black
1 x Black Hammerton
1 x Black Wrinkle
1 x Paccar black
1 x Black Magic
1 x BK08 Semi-matte black
1 x Black texture 7-13%
1 x Eboney Chrome

Comments Off on Common black colour swatch set

Vegas – (5 meters for $25.00 SALE)

Posted on July 31, 2017 by emerald

Length per quantity is 5 meters long

We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products.  All sale films will be sold in 5-meter rolls at a time.  All sale films will be discontinued after they are sold out, once it’s gone it’s gone. 

Comments Off on Vegas – (5 meters for $25.00 SALE)

Mad Dog Skulls

Posted on July 31, 2017 by emerald

This is a 1 meter wide film of a creepy skull pattern that is black and clear with lots of detail. Change the base colour to give different effects.
All Films sold by the meter.

Comments Off on Mad Dog Skulls

Amazing Pearl Starter Kit

Posted on July 16, 2017 by emerald

This kit contains 4 different pearl additives
1 oz of Blue Ghost pearl – ADDMG
1 oz of Fine gold pearl – ADDMB
1 oz of Fire side Copper pearl – ADDMC
1 oz of Medium Magna pearl – ADDIMSF

blue-ghost-pearl-272x300fire-side-copper-1-273x300

fine-gold-275x300medium-magna-pearl-274x300

Comments Off on Amazing Pearl Starter Kit

Finer Spot gun

Posted on July 12, 2017 by emerald

Very high quality smaller spray gun ideal for painting smaller more complex parts or doing touch up work 1.2 MM needle nozzle set.

This is a great gun for working with ceramic coatings, especially when spraying exhaust systems. This has all the amazing fetures of the full size4 FIner Pluse II gun in a compact forum. Consistent spray pattern, a compact size and ultra-light weight easy operation,
plus simple maintenance. By improvement of atomizing performance at low pressure, higher performance and further energy saving are achieved. Optimum air cap and fluid nozzle design enabling both improvement of atomizing and saving energy. Stainless steel body SUS 303, water-based paint compatible

Come with a 150ml side mount paint cup

MANUAL

finer spot

Comments Off on Finer Spot gun

Blue Explosion (49)

Posted on July 8, 2017 by emerald

Sold by the oz

Blue Explosion, is Ghost type pearl with a extra large flake, that is sold by the oz and has an average micron size of 120.

This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.

These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.

Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.

Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.

This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.

Comments Off on Blue Explosion (49)

Sparkle Bright Blue (45)

Posted on July 8, 2017 by emerald

Sparkle Bright Blue, is Ghost type pearl with a large flake, that is sold by the oz and has an average micron size of 120.

This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.

These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.

Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.

Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.

This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.

Comments Off on Sparkle Bright Blue (45)

Sparkle Bright Green (48)

Posted on July 8, 2017 by emerald

Sparkle Bright Green, is Ghost type pearl with a large flake, that is sold by the oz and has an average micron size of 120.

This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.

These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.

Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.

Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.

This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.

Comments Off on Sparkle Bright Green (48)

Sparkle Bright micro blue (44)

Posted on July 8, 2017 by emerald

Sparkle Bright micro Blue, is Ghost type pearl with a fine flake, that is sold by the oz and has an average micron size of 40. This is similar to the Blue ghost pearl but it has a stronger and bright blue flake.

This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.

These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.

Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.

Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.

This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.

Comments Off on Sparkle Bright micro blue (44)

Red Ghost pearl (13)

Posted on July 8, 2017 by emerald

Red Ghost pearl is a fine flake that is sold by the oz and has an average micron size of 40.

This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.

These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.

Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.

Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.

This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.

Comments Off on Red Ghost pearl (13)

Blue Ghost pearl (8)

Posted on July 8, 2017 by emerald

Blue Ghost pearl is a fine flake that is sold by the oz and has an average micron size of 40.

This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.

These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.

Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.

Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.

This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.

Comments Off on Blue Ghost pearl (8)

Green Ghost pearl (38)

Posted on July 8, 2017 by emerald

Green Ghost pearl is a fine flake that is sold by the oz and has an average micron size of 40.

This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.

These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.

Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.

Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.

This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.

Comments Off on Green Ghost pearl (38)

Sparkle Bright Gold (47)

Posted on July 8, 2017 by emerald

Sparkle Bright Gold is a large flake that is sold by the oz and has an average micron size of 120.
This is the nice gold “Ghost” sparkle to pops in the sun This is a loud product that has loud effects.

This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.

These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.

Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.

Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.

This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.

Comments Off on Sparkle Bright Gold (47)

Micro Red to Orange (52)

Posted on July 8, 2017 by emerald

Chameleon Pearls are sold by the oz and have an average micron size of 40 microns
Chameleon Pearls are colour shifting pearls that change from one colour to another when viewing them at different angles. Our Chameleon Pearls will give the most intense look when added to or applied over a black base coat but the can also be added to other colours to give off truly custom look. Darker colours help show off the intense flips these pearls can achieve.

1 oz can mix 1-4 quarts depending on the intensity you are looking for. Mix in clear coat/inter-coat clear or even a coloured base coat. Added pearl in the colour base coat will not be as intense as adding it over the base coat with a inter coat clear. Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. Always top coat with a layer of clear that does not have any pearl or metal flake in it.

Comments Off on Micro Red to Orange (52)

Intense Red to Gold (54)

Posted on July 8, 2017 by emerald

Chameleon Pearls are sold by the oz and have an average micron size of 75 microns (0.003″)
Chameleon Pearls are colour shifting pearls that change from one colour to another when viewing them at different angles. Our Chameleon Pearls will give the most intense look when added to or applied over a black base coat but the can also be added to other colours to give off truly custom look. Darker colours help show off the intense flips these pearls can achieve.

1 oz can mix 1-4 quarts depending on the intensity you are looking for. Mix in clear coat/inter-coat clear or even a coloured base coat. Added pearl in the colour base coat will not be as intense as adding it over the base coat with a inter coat clear. Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. Always top coat with a layer of clear that does not have any pearl or metal flake in it.

Comments Off on Intense Red to Gold (54)

Deep Brown Pearl (34)

Posted on July 3, 2017 by emerald

Deep Drown Pearl is a medium size flake that is sold by the oz and has an average micron size of 40.

This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.

These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.

Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.

Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.

This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.

Comments Off on Deep Brown Pearl (34)