Nanner Peel Powder Coat / Paint Stripper

Description

Nanner Peel Chemical Stripper

Nanner Peel is a powerful water-based paint and powder coating remover that is non-toxic, biodegradable, and environmentally safe. It’s specially formulated for use on aluminum and other non-ferrous metals, making it ideal for job shops, coaters, and restoration work.

This stripper can be used at full strength or diluted up to 50% with water. For best results, heat the solution to 165–175°F in a stainless-steel drum with a lid. Avoid using mild steel tanks, and always keep the lid on when not in use to minimize evaporation.

Directions for Use:

1. Prepare a strip tank with proper ventilation and a secure lid.

2. Submerge parts in solution (diluted or full strength).

3. Recommended dwell time: 20 minutes at 165–175°F. Dwell time may vary based on coating.

4. Rinse parts thoroughly using fresh water and a pressure washer.

Key Features:

• Designed for use on aluminum and non-ferrous metals

• Also effective on many ferrous metals

• No methylene chloride – safer for users and the environment

• Low vapor pressure means fewer VOCs

• Can remove paints, epoxies, and various powder coat types

• Safe for most alloys except magnesium

⚠️ Caution – Magnesium Warning:

Do not use Nanner Peel on magnesium or on parts that may contain magnesium alloys. Some aluminum parts—especially castings—may contain magnesium.
If you’re unsure, do not leave parts in overnight. Extended dwell times on magnesium-containing alloys can cause pitting or surface damage. Always test on a small area first when working with unknown aluminum types.

This chemical is produced by Cherokee Chemical Co.