$24.92
Discount Pricing
Due to a recent manufacturing price increase, this product is no longer eligible for volume discounts. For more information CLICK HERE
Description
PC1214 | Screaming Shocked Yellow | |||
CHEMISTRY | POLYESTER TGIC A | |||
REGULAR CURE SCHEDULE | 375F / 20 MIN | |||
MIN RANGE | 356F / 20 MIN | |||
MAX RANGE | 400F / 15 MIN | |||
RECOMMENDED THICKNESS | 2.5-3.5 mils | |||
PENCIL HARDNESS | H | |||
SPECIFIC GRAVITY | 1.2-1.8 g/cm8 | |||
THEORETICAL COVERAGE | 51.5 ft2 /lb at 2.5 mils | |||
PENCIL HARDNESS | 2H minimum | |||
GLOSS LEVEL (60°) | 80-95+ | |||
SALT SPRAY | 1,000 hours | |||
BALL IMPACT | 20 in/lb | |||
SDS Sheet info # | #6A – Polyester TGIC (Group A) | |||
SDS link | https://emeraldcoatings.com/sds-sheets/ | |||
This Product is transparent and will show the base coat through the finish. It is recommended to spray over a metallic silver or chrome powder. This can also be used over polished surfaces with out a base coat. Applying over a polished surface will have the highest shine, however applying over polished or chrome surfaces may be more prone to chipping. *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Due to the bright pigments used in this products, the UV stability is reduced in comparison to other candy colours. This will also be more prone to areas with lower film build. Fading may occur when used in areas with high UV exposure. |
Additional information
Weight | 1 lbs |
---|---|
Dimensions | 2.37 × 2.37 × 2.37 in |