GREEN DIGITAL CAMO

GREEN DIGITAL CAMO

 

 

Length sold by the Meter

 

Comments Off on GREEN DIGITAL CAMO

SMOKE – (5 meters for $25.00 SALE)

SMOKE

 

 

Length per quantity is 5 meters long

We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products.  All sale films will be sold in 5-meter rolls at a time.  All sale films will be discontinued after they are sold out, once it’s gone it’s gone. 

 

Comments Off on SMOKE – (5 meters for $25.00 SALE)

BLUE LIGHTNING (50 cm)

BLUE LIGHTNING (50 cm)

Length sold by the Meter

Comments Off on BLUE LIGHTNING (50 cm)

BRUSHED STEEL

BRUSHED STEEL

Length sold by the Meter

 

Comments Off on BRUSHED STEEL

BRUSHED ALUMINUM

BRUSHED ALUMINUM

Length sold by the Meter


Comments Off on BRUSHED ALUMINUM

PIZZAZ

PIZZAZ

Length sold by the Meter

Comments Off on PIZZAZ

BURTON

BURTON

Length sold by the Meter

Comments Off on BURTON

THINK PINK CAMO (90 cm)

 

THINK PINK CAMO

Length sold by the Meter

 

Comments Off on THINK PINK CAMO (90 cm)

SAFARI GIRAFFE

SAFARI GIRAFFE

Length sold by the Meter

Comments Off on SAFARI GIRAFFE

CANADIAN FLAGS (50 cm) – (5 meters for $25.00 SALE)

CANADIAN FLAGS (50 cm)

Length per quantity is 5 meters long

We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products.  All sale films will be sold in 5-meter rolls at a time.  All sale films will be discontinued after they are sold out, once it’s gone it’s gone. 

Comments Off on CANADIAN FLAGS (50 cm) – (5 meters for $25.00 SALE)

GEARS (50 cm)

GEARS

Length sold by the Meter

 

Comments Off on GEARS (50 cm)

HD FLAT BLACK

HD FLAT BLACK
Ultra smooth, Ultra flat black powder

PC1082 HD FLAT BLACK
CHEMISTRY POLYURETHANE GROUP B
REGULAR CURE TEMP 375F / 15-20 MIN
MIN TEMP NA
MAX TEMP 400F / 10-15 MIN
RECOMMENDED THICKNESS 2.5-3.5 mils
PENCIL HARDNESS 4H
SPECIFIC GRAVITY 1.44 +/-0.05 g/cm³
THEORETICAL COVERAGE 134 sq.ft/lb/mil
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 8-12
SALT SPRAY 1,000 hours
BALL IMPACT 40 in/lb
SDS Sheet info # #5B – Polyurethanes (Group B)
SDS link https://emeraldcoatings.com/sds-sheets/
WEATHER RESISTANT POWDER COATING FOR INTERIOR AND EXTERIOR APPLICATIONS, clear coat is not needed but will add extra protection.   When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. over curing the base coat can cause possible Delamination between coatings.
Comments Off on HD FLAT BLACK

Caliper Painting Kit

Dress Up Your Calipers!

Nothing ruins the appearance of a sharp set of wheels like dirty, corroded calipers lurking from behind. Now dress up those steel or aluminum calipers with a super-tough durable finish that will make your car or truck look terrific. Our new caliper paint is beautiful in appearance, and strong enough to withstand the punishment of road debris and temperature extremes. And it looks terrific on any car or truck. Then, whenever your calipers get covered with dirt and brake dust, clean them with anything you like; the POR-15® Caliper Paint™ will stand up to just about anything.

tech sheets
Caliper Kit 2

Comments Off on Caliper Painting Kit

Arbor Adapter 1/2

These sturdy adapters are great for mounting wire wheel brushes, grinding wheels, cut off wheels, buffs etc onto any chuck power tool.  1/4″ or 1/2″ threaded end.

Comments Off on Arbor Adapter 1/2

P-14 GLIMMER

P-14 GLIMMER

PC1138 P-14 GLIMMER
CHEMISTRY POLYESTER TGIC A
REGULAR CURE TEMP 375F 13-20 MIN
MIN TEMP 356F 15-25 MIN
MAX TEMP 400F 10-15 MIN
RECOMMENDED THICKNESS 2.5-3.5 mils
PENCIL HARDNESS 2H minimum
SPECIFIC GRAVITY 1.2-1.8 g/cm3
THEORETICAL COVERAGE 51.5 ft2 /lb at 2.5 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 80-95+
SALT SPRAY 1,000 hours
BALL IMPACT 80 in/lb
SDS Sheet info # #6A – Polyester TGIC (Group A)
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.

***This is an exterior grade metallic powder and does not require a clear coat, however a clear coat will add extra protection and gloss to the over all finish ***

Comments Off on P-14 GLIMMER

WINTER CAMO (5 meter roll SALE)

WINTER CAMO

Length per quantity is 5 meters long

We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products.  All sale films will be sold in 5-meter rolls at a time.  All sale films will be discontinued after they are sold out, once it’s gone it’s gone. 

Comments Off on WINTER CAMO (5 meter roll SALE)