Oak Leaf Camo (80cm)

Posted on August 11, 2016 by emerald

This is a beautiful full colour fall oak camo. This full colour film with full realistic details will help blend in any dipped items in the fall woods.
This is a a 80cm wide film, all films are sold by the Meter

Comments Off on Oak Leaf Camo (80cm)

Illusion Chameleon Carbon Fiber (50 cm)

Posted on August 11, 2016 by emerald

ILLUSION CHAMELEON CARBON FIBER
This is one of the new styles of Carbon fibers to hit the market. It is a clear and illusion blue chameleon metallic carbon fiber mix that moves and shines in the sun light. This is a 1 meter wide film, all films are sold by the Meter
Black base coat is recommended but other colours can slightly change the appearance of the illusion blue chameleon metallic

Comments Off on Illusion Chameleon Carbon Fiber (50 cm)

.062 x 4 inch Long S Hook (50 Count)

Posted on August 8, 2016 by emerald

.062′ x 4′ Long S Hook (50 Count)

Weight capacity is approximately 8 LBS.

Comments Off on .062 x 4 inch Long S Hook (50 Count)

Goldscale Snake Skin 50cm – (5 meters for $25.00 SALE)

Posted on August 2, 2016 by emerald

Length per quantity is 5 meters long

We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products.  All sale films will be sold in 5-meter rolls at a time.  All sale films will be discontinued after they are sold out, once it’s gone it’s gone. 

Comments Off on Goldscale Snake Skin 50cm – (5 meters for $25.00 SALE)

Rattlesnake 80 cm wide

Posted on August 2, 2016 by emerald

Rattlesnake is a  80 cm wide wide film that is black and clear. Use this film over different base coats to change the effect of the pattern.
all films are sold by the Meter

Comments Off on Rattlesnake 80 cm wide

Spruce Wood Grain

Posted on July 19, 2016 by emerald

this is a fine looking hard wood film with great detail and colour.
100cm (1 meter) wide, all films are sold by the Meter

Comments Off on Spruce Wood Grain

Mahogany Wood Grain

Posted on July 19, 2016 by emerald

This is a dark smooth looking wood grain that has a realistic look to real wood.
This is a 100cm  meter)wide film, all films are sold by the Meter

Comments Off on Mahogany Wood Grain

Grimm

Posted on July 11, 2016 by emerald

Grimm – The Grim Reaper is here and he’s stinkin’ AMAZING. High detail and high quality film. This film is black and clear, so any color can be used underneath to change the outcome. Grimm is a super original design that we worked on for quite some time from concept to reality and is only available in Canada from us!!

High quality film. Clear and black making the possibilities endless. The largest Grimm’s are 3.25″ (8.25 cm)

1 Meter wide

Recommended Base Color: Any

HOW TO DIP WITH GRIMM: Leave it on the water for about 70-80 seconds (at about 90 degrees F). HE DOES NOT LIKE TO STRETCH! Keep him pretty tightly dammed up and make sure that you have an extra 4-6″ on each side of your item of film to accommodate. He will keep his color! Just have to keep him tight.

Comments Off on Grimm

Tiki Exotica By Von Kev

Posted on July 11, 2016 by emerald

A Polynesian twist with great detail in this fine quality black and clear fun film! Lots of different looks using varied base coats! Try bright pinks or red or blues! Another exclusive film found in Canada only here!! 1 meter wide, all film sold by the meter.

Comments Off on Tiki Exotica By Von Kev

Zombiecom Grey

Posted on July 11, 2016 by emerald

Another Canadian exclusive from your buds here at Emerald Coatings from HydroMonkeys! This black and clear film is a top quality fun llok at Zombies! 1 meter wide all films sold by the meter.

Comments Off on Zombiecom Grey

Dirty CheckerPlate

Posted on July 11, 2016 by emerald

Another Hydromonkeys Original and Canadian Exclusive for Emerald Coatings! This looks great over a chrome or shiny base coat to give you a checker plate look. i meter wide, all films sold by the meter

Comments Off on Dirty CheckerPlate

Royal Velvet

Posted on June 22, 2016 by emerald

Royal Velvet is a Dark Royal Red metallic finish.

CHEMISTRY ROYAL VELVET
CHEMISTRY Polyester TGIC Metallic
REGULAR CURE TEMP 15 Minutes@ 375°F
MIN TEMP NA
MAX TEMP NA
RECOMMENDED THICKNESS 1.5 TO 3.5 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.26 +/- .05
THEORETICAL COVERAGE 56 sq/ft @ 2.0 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 85-95+
SALT SPRAY 1,000 hours
BALL IMPACT 80 in/lb
SDS Sheet info # #9 – Polyester TGIC Metallic
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.
Comments Off on Royal Velvet

Lemon Lime Chameleon

Posted on June 22, 2016 by emerald

Lemon Lime Chameleon is a multi colour that changes in the sun from a Goldish to a Yellowish to a Greeish, to a Blueish/green colour.

MC1107 LEMON LIME CHAMELEON
CHEMISTRY Polyester TGIC Metallic
REGULAR CURE TEMP 15 Minutes@ 375°F
MIN TEMP NA
MAX TEMP NA
RECOMMENDED THICKNESS 1.5 TO 3.5 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.26 +/- .05
THEORETICAL COVERAGE 56 sq/ft @ 2.0 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 85-95+
SALT SPRAY 1,000 hours
BALL IMPACT 80 in/lb
SDS Sheet info # #9 – Polyester TGIC Metallic
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.
Comments Off on Lemon Lime Chameleon

Midnight Brass Explosion

Posted on June 21, 2016 by emerald
CHEMISTRY MIDNIGHT BRASS EXPLOSION
CHEMISTRY Polyester TGIC Metallic
REGULAR CURE TEMP 15 Minutes@ 375°F
MIN TEMP NA
MAX TEMP NA
RECOMMENDED THICKNESS 1.5 TO 3.5 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.26 +/- .05
THEORETICAL COVERAGE 56 sq/ft @ 2.0 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 85-95+
SALT SPRAY 1,000 hours
BALL IMPACT 80 in/lb
SDS Sheet info # #9 – Polyester TGIC Metallic
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.
Comments Off on Midnight Brass Explosion

Midnight Maple Explosion

Posted on June 21, 2016 by emerald

 

CHEMISTRY MIDNIGHT MAPLE EXPLOSION
CHEMISTRY Polyester TGIC Metallic
REGULAR CURE TEMP 15 Minutes@ 375°F
MIN TEMP NA
MAX TEMP NA
RECOMMENDED THICKNESS 1.5 TO 3.5 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.26 +/- .05
THEORETICAL COVERAGE 56 sq/ft @ 2.0 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 85-95+
SALT SPRAY 1,000 hours
BALL IMPACT 80 in/lb
SDS Sheet info # #9 – Polyester TGIC Metallic
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.
Comments Off on Midnight Maple Explosion

Bronze Copper Explosion

Posted on June 21, 2016 by emerald

Bronze Copper Explosion is a dark black with a huge explosion of copper sparkle when hit with the sun at the right angles.

MC1110 BRONZE COPPER EXPLOSION
CHEMISTRY Polyester TGIC Metallic
REGULAR CURE TEMP 15 Minutes@ 375°F
MIN TEMP NA
MAX TEMP NA
RECOMMENDED THICKNESS 1.5 TO 3.5 MILS
PENCIL HARDNESS 2H
SPECIFIC GRAVITY 1.26 +/- .05
THEORETICAL COVERAGE 56 sq/ft @ 2.0 mils
PENCIL HARDNESS 2H minimum
GLOSS LEVEL (60°) 85-95+
SALT SPRAY 1,000 hours
BALL IMPACT 80 in/lb
SDS Sheet info # #9 – Polyester TGIC Metallic
SDS link https://emeraldcoatings.com/sds-sheets/
*Clear Coat Recommended, will Improved Mar Resistance and will improve the over all look and depth of the metallic finish.  *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings.
Comments Off on Bronze Copper Explosion