My Account
Ghost Skulls
100cm x 100 cm.
site info + updates
CALIPER PAINT
8oz. Caliper Paint. Have your own cleaner, prep and POR-15? Or, need extra Caliper Paint? Order just the paint! Available in 5 colours
Dress Up Your Calipers!
Nothing ruins the appearance of a sharp set of wheels like dirty, corroded calipers lurking from behind. Now dress up those steel or aluminum calipers with a super-tough durable finish that will make your car or truck look terrific. Our new caliper paint is beautiful in appearance, and strong enough to withstand the punishment of road debris and temperature extremes. And it looks terrific on any car or truck. Then, whenever your calipers get covered with dirt and brake dust, clean them with anything you like; the POR-15® Caliper Paint™ will stand up to just about anything.
Comments Off on CALIPER PAINT
ENGINE ENAMELS
Extra-pigment ENGINE ENAMELS have been formulated by RestoMotive Laboratories to be the best and most beautiful engine enamels you can buy. Enamels are available in incredibly rich colors that flow easily, cover better than any other paint, and last longer. Our enamels are non-flammable and conform to even the strictest California environmental standards. We invite you to compare them with any other product and you’ll see what we mean.
Typically, a pint is enough for an entire engine.
Chevy Orange Quart | Chevy Orange Pint | Black Quart | Black Pint | White Pint | Pontiac Metallic Light Blue Pint | Pontiac Light Blue Pint | Oldsmobile Gold Pint | MG Maroon Pint | Hi Po Yellow Pint | Ford Medium Blue Pint | Ford Corporate Blue Pint | Ford Classic Blue Pint | Ford Classic Red Pint | Ford Green Pint | Chrysler Hemi Turquoise Pint | Austin Healy Green Pint | Chevy Red Pint | Chrysler Hemi Orange Pint | Chrysler Blue Pint | Chevy Blue Pint | Cadillac dark Blue Pint | Buick Turquoise Pint | Buick Green Pint | ALUMINUM (1 PINT)
Comments Off on ENGINE ENAMELS
Copper Brown sparkle (22)
Copper Brown sparkle is a large flake that is sold by the oz and has an average micron size of 150.
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on Copper Brown sparkle (22)
Brass sparkle (50)
Brass sparkle is a large flake that is sold by the oz and has an average micron size of 150.
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on Brass sparkle (50)
XL Fireside red (43)
XL Fireside red is a large flake that is sold by the oz and has an average micron size of 200.
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on XL Fireside red (43)
Fire side Copper pearl (10)
Fire side Copper pearl is a fine pearl that is sold by the oz and has an average micron size of 35.
This is a fine size deep copper pearl that is used in many products. Try mixing this with a dark red to give you a red pearl with a flame sparkle that jumps in the sun.
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on Fire side Copper pearl (10)
Fine Gold pearl (9)
Fine Gold pearl is a fine pearl that is sold by the oz and has an average micron size of 35.
This is a fine size deep gold pearl that is used in many products. Try mixing this with a dark orange to give you a Gold-Orange pearl that will stand out in the sun
Fine golds like this look great in Yellow, Orange, Green, Brown and Reds
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on Fine Gold pearl (9)
Soft Gold sparkle (66)
Soft Gold sparkle is a large pearl that is sold by the oz and has an average micron size of 100.
This is a nice medium size gold pearl that is found in a lot of metallic colours.
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on Soft Gold sparkle (66)
Large gold sparkle (39)
Sparkle Bright Gold is a large flake that is sold by the oz and has an average micron size of 120.
This is a nice Ghost Gold pearl that has a beautiful luster.
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on Large gold sparkle (39)
Extra large Gold sparkle (40)
Extra large Gold sparkle is a larger flake that is sold by the oz and has an average micron size of 450.
This is the Largest Gold flake that we sell. This is a loud product that has loud effects.
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on Extra large Gold sparkle (40)
Small Magna pearl (64)
Small Magna pearl is a small pearl that is sold by the oz and has an average micron size of 35
This is a standard sliver pearl that is used in many metallic colours.
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on Small Magna pearl (64)
Medium Magna pearl (65)
Medium Magna pearl is a Medium pearl that is sold by the oz and has an average micron size of 75
This is a standard sliver pearl that is used in many metallic colours.
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on Medium Magna pearl (65)
Large silver sparkle (46)
large silver sparkle is a larger flake that is sold by the oz and has an average micron size of 110
This is a nice size large flake that has a great sparkle.
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on Large silver sparkle (46)
Extra large silver sparkle (11)
Extra large silver sparkle is a larger flake that is sold by the oz and has an average micron size of 350
This is the Largest silver flake that we sell. This is a loud product that has loud effects.
This product can be used with liquid paint as well as powder coating.
With liquid paint, 1 oz will mix 1-4 quarts of paint depending on the intensity of effect you are looking for.
With Powder coating, 1 oz will mix 2-5 lbs of powder depending on the intensity of effect you are looking for.
These flakes can be mixed with your base coat to create custom metallic colours or mix them in your clear/intercoat clear over your base coat. Mixing with or over darker colours like black will show off the true look of the metallic.
Always trial a small amount first on a sample part when using for the first time. We recommend slowing adding the pearl or flake in small amounts and testing when creating custom blends, you can easily add more pearl to the paint but you can never remove the pearl if you add to much. You can add this in the base coat but it will have a larger effect and use less metal flake when added in an inter coat clear over the base coat.
Always top coat with a layer of clear to help protect the pearl of flake from the sun. This will also help the metallic flake or pearl POP in the sun.
This product can be used for powder coating, it can be mixed in either the base coat or the clear coat. You will only need to use half the amount if mixing it in the clear coat. Always put a clear coat (with out flakes or pearls) over this product, even if your mixing it in the clear. 1 oz of this product will mix 2-5 lbs of powder depending on how aggressive of a look you are wanting.
Comments Off on Extra large silver sparkle (11)
Evergreen Camo – (5 meters for $25.00 SALE)
Evergreen Camo
Length per quantity is 5 meters long
We are currently holding a sale on overstock, slow stock, and old stock hydrographic films and paint to make way for some new products. All sale films will be sold in 5-meter rolls at a time. All sale films will be discontinued after they are sold out, once it’s gone it’s gone.
Comments Off on Evergreen Camo – (5 meters for $25.00 SALE)