My Account
$29.75
Discount Pricing
FORMULATION CHANGE **As of Sept 14th 2022, do not mix with the previous version
Description
FORMULATION CHANGE **As of Sept 14th 2022, do not mix with the previous version
You can not mix this with the old powder as they are different chemistries. Being a polyurethane, it will smoke in the oven when curing. This will go to a darker purple when a clear is applied heavier.
| pc1055 | DORMANT PURPLE | |||
| CHEMISTRY | POLYURETHANE GROUP B | |||
| REGULAR CURE TEMP | 375F 15 MIN | |||
| MIN TEMP | 350F 25 MIN | |||
| MAX TEMP | 400F 10 MIN | |||
| RECOMMENDED THICKNESS | 3.5-4.5 mils | |||
| PENCIL HARDNESS | 2-H | |||
| SPECIFIC GRAVITY | NA | |||
| THEORETICAL COVERAGE | 150ft^2 /lb/mil | |||
| PENCIL HARDNESS | 2H minimum | |||
| GLOSS LEVEL (60°) | NA | |||
| SALT SPRAY | 1,000 hours | |||
| BALL IMPACT | 100 in/lb | |||
| SDS Sheet info # | #6A – Polyester TGIC (Group A) | |||
| SDS link | https://emeraldcoatings.com/sds-sheets/ | |||
| *Dormant Colours need a clear coat for the full colour to come through. *When coating in 2-3 stages, always particularly cure the base coat around 50-75% of the recommended cure schedule to allow the top coat to properly cross-link with the base coat. This method of curing will result in the best possible bond between coats. Over curing the base coat can cause possible delamination between coatings. | ||||
Formulation Change Sept 14th 2022 do not mix with the previous version
***EMERALD COATINGS RECOMMENDS USING A CLEAR COAT TO BRING OUT DESIRED COLOR, YOU WILL NOT GET THE COLOR AND DEPTH UNLESS YOU USE A CLEAR COAT.
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 2.37 × 2.37 × 2.37 in |
