These colors are approximate. The finish will normally have a more ‘metallic’ look, and will vary slightly depending on the alloy and surface preparation.
Procedure for Obtaining Dyed Anodize
Anodize the aluminum at 60-75°F for 90 minutes at 4.5 amps per sq foot or 0.03 amps per sq inch. Use our Anodizing Kit.
After thorough rinsing, immerse the part in the dye at a temperature of 140°F for 15 minutes.
Finally, seal by hanging the part in a sealer bath for 15 minutes.
All dyes are fully ROHS compliant.
Note: All dyes are suitable for high temp and low temp sealants, except Grey BL and Yellow 4A, which should not be sealed using LT Sealer.
|Dimensions||1 x 1 x 2 in|