Brown GL Anodizing Dye – 4oz


SKU: DYEBR9 Category:


These colors are approximate. The finish will normally have a more ‘metallic’ look, and will vary slightly depending on the alloy and surface preparation.

Procedure for Obtaining Dyed Anodize
Anodize the aluminum at 60-75°F for 90 minutes at 4.5 amps per sq foot or 0.03 amps per sq inch. Use our Anodizing Kit.

After thorough rinsing, immerse the part in the dye at a temperature of 140°F for 15 minutes.

Finally, seal by hanging the part in a sealer bath for 15 minutes.

All dyes are fully ROHS compliant.
Note: All dyes are suitable for high temp and low temp sealants, except Grey BL and Yellow 4A, which should not be sealed using LT Sealer.

Additional information

Weight 1 lbs
Dimensions 1 × 1 × 2 in
Bookmark the permalink.